How to Repair damaged window moldings on Dodge/Ram Trucks DIY

I show you how I replace the outer door moldings on my Ram, I give a step by step guide to help you do yours on you own.

[octaviogonzalez]

My man just installed all 4 of mine on a 2016 crew cab ram 1500. Used your video as my guide. Bought the entire pair on Amazon for 40$ and they fit and look cleaner than the original. 10 star video boss appreciate it 🤙🏼

[cheryl-in]

So simple !! I watched your video then ordered parts. I think the entire process took me about five minutes for each window.... Your instruction and 'watch out not to loose " advice was spot on. I am a 67 year old female DIYer. I am the one and only owner of a 2016 RAM Bighorn- with 117, 000 miles (its 2025) and the original weather striping is rotting off from Florida heat, intense humidity, burning sun and age. I appreciate your easy detailed instruction. Thank you.

[TruthOrNarrative]

So very helful! I had the same condition develop on my 2014 SLT. I ordered the parts a few months ago and have just been sitting on them. You make it look so terribly simple that I'll probably do it tonight after the sun goes down and cools off over -30deg (I have summer).

[thomasdickerson]

I just replaced my 2014 3500 Mega cab front drivers side rubber molding. No need to remove the mirror as the molding just slides in. Had to work a little to remove the old one, but the new one went right on. Just make sure you push the moding all the way down good. You will hear it pop into place. I spent $100.00 for just the drivers side molding which included shipping and tax. WOW, figured I'd stay with OEM to make sure it fits good.

[KurtTherklesen]

Thank you!!! Similar experience with dealer wanting $800 plus labor, bought full set for 2020 Ram 2500 Crew Cab for $70 online, with your video took 20mins to install, turned out great, now am curious to see how $70 seals hold up compared to the worthless original set.

[fuldadowns]

Thanks for the video it was superb, I replace all 4 on my 2017 Dodge Ram 1500 I was planning to have the dealership do it here in Savannah, Ga. But, after purchasing the 4 belt weather strips from the dealership for $868.00 I decided I would do it after seeing your video. The dealership said it would be around $1800 with parts and labor. Thanks Again!

[elgil]

Thanks for the video, I bought the molding don’t know how to do it, checking you video make sense and was very easy no trouble at all just follow you steps 👍🏼thanks again

[youngswisher]

Big thanks, I just replaced mine, cost 260 for front two but with your help it took me about 20 minutes

[FreddyBfromDaBay]

Great video. Thanks for the heads ups and I’m glad I’m not the only one that makes noises when I work 😂

[RayBartlett-whny]

Great instructions and thank you. I replaced mine (2014) with what I found on Amazon and much cheaper. Not sure the durability but they look good now. Loosening mirrors are a must but removal is not necessary. The new ones are much harder to remove after seating so be sure the screw holes line up.

[DMACHOLMAN]

I just sold my fourth gen. But if i still owned it, this information would've been great

[WeAreMessengersMusic]

Great video. Do you have a link to where I can find the front and rear moldings?

[jaygonzalez]

Dude, I'm in ATX. The Texas heat cooked the moldings on my 2012 Ram, and they're so bad now that they dont' even squeegee the morning condensation off the window. Thanks for the video.
Gonna head the dealership tomorrow to get mine. Hopefully, I'll be saying "voila" myself when I change out mine.
You happen to remember the part numbers for each molding? Thanks again.

[HotOneRecordz]

You don't have to remove the mirror. The trim slides right in there.

[stevenclose]

How do you get the mirrors to fold when taking key out ignition?

[kmookymook]

Thanks brother I half to replace mine looks very easy

[MikeWerner-vz]

Where can I get replacement screws/ fasteners?

[ericestep]

I’ve watched a few of these videos and seems like you’re the only one that removed the mirrors. It don’t look to me mine go under the mirror any. I got a 2500 with the bigger tow mirrors. Maybe that’s why. Idk

[tomh]

Do i do it the same way on my 2008 Dodge grand caravan? Can't find a Video to that.

[stevenhicks]

How long before they start warping again you think?