Odes, Massimo, Bennche common issues

Here are a few links for parts & help on some issues.


Odes owners group on Facebook

[DennisBogart-bs]

Cyle thanks for the help . I had no spark and checked the crank sensor. It had an ohms reading at first but when moving the wire at the top of the sensor it would loose connection. 👍

[tommymctaggart]

After hours and hours of scouring the internet, finally Cyle has some real experience and real "fix-it" issue fixes.

[scottstallings]

Man as many questions as you answered, you deserve a beer.
But ill say you rock and very knowledgeable
And ill say it for everyone We AS MACHINE OWNES LOVE YOUR KNOWLEDGE AND HELP.
Looking for schematic for cooling system on a hisun 700

[BrandonLayMusic]

I have a 2013 odes dominator and the starter just spins. Is it possibly the sprang clutch blew up? Anything to look out for? Please advice is appreciated

[skidmark]

Just picked up a MSU 850 and already had to change the throttle cable cause it was sticking. It was melting the inside of the cable. It would stick when the engine was cold. This started at on 27 miles on it. Dealer got me a new one and had to fix it myself cause all their mechanics quit. I bought some 1/2 heater hose and slid the new cable through it to try and protect it from the heat. I also bought some 1/2 thick adhesive backed firewall insulation for the cover like you did cause you ain’t lying on how hot the center console gets. If I still get throttle cable issues, I’ll just run it on the outside of the console. Already thinking of selling it and getting a Honda

[ItsTrollen]

What could be the issue with mine it starts and idles fine but when you go to give it throttle it dies I have replaced the injectors and the tps and iac

[sageturner]

If you can tell me how to adjust the shifter. My neighbor has a 2013 800cc that’s hard to shift into gear.. any tips? Thanks

[kendallburks]

Great informative video. You are very knowledgeable on these machines! I just bought a new Odes 800 x2 and just reached 20 hours for break-in and was wondering how to get rid of the governor that prevents it from going past 25 mph.

[WarningHumanity]

My oades 800 overheats its brand new and the dealer says it does it at low speed so I guess they think I’m supposed to drive 40mph everywhere and well there saying I can’t get a refund and is I put a oversized thermostat on it I’ll void warranty but if I take it out to like the river run it’s 7 miles of trails. I can’t take it there. It overheats every time I slow down. I’m so frustrated. This thing is brand new.

[kenpeterson]

I really like the odes but when I saw that Massimo bought them I have backed off when I test dove the Massimo I felt like it was about to fall apart even though it was new it was a really rough ride but of course I like their prices over the Polaris and Can am.

[josephannable]

I have a massimo msu500 that shut off in a field. I towed it back to the farm. It acts like it's stuck in reverse and wont crank. Anyone in maryland area work on these things?

[dodgerdgp]

Im looking for a front differential and both front cv axle shafts for a 2020 massimo warrior 1000 crew is there any aftermarket parts for it?

[rickmcdonald]

I have a 2021 massimo ODES 800cc utv that I purchased from tractor supply.
Max speed before the governor/speed limiter kicks in is 23 mph.
Is there a way to increase the maximum speed?

[tonylangendorf]

So if you had the choice to buy a newer Odes machine say 2019 vs an older Kawasaki/Polaris/Can Am say 2014, which way would you go based off of issues you have seen?

Thanks,

[alexjaeger]

Wow amazingly informative video! Just what I was looking for. I'm hopefully buying a 2014 odes lz800 for 1500$ it has coolant in the oil, so hopefully a head gasket will fix. Good to know the possible cause of the overheating engine. The first time I can afford a utv so fingers crossed. Do these all have can am engines?

[ajkemer]

Just bought a 2017 dominator 1000 5 seater for 3k has 1300 miles need to redo the stator to regulator harness not a big deal while going over it noticed some slope in control arm bushing and the front bearings. Also the front diff pinion has a lot of slop wondering if the nut may be backed off or if maybe the bearings shot.

[JeremyCrawford-ht]

On massamo 500 ordered solenoid. Replaced starter battery. No start clicks. When jumped still no start. 2017 103 hrs. Can solenoid still be bad

[legendkillla]

Massimo 250 i ran jumpers off the batte to each fuse it stsrts and stays running it wont shut off and stays running with key out is thay the ignition switch ?

[latonyadenney]

On a 2017 odes 800 x4 lt Does a hard knocking sound automatically mean a main bearing or rod? Or is it possible for a sensor to cause this?

[sageturner]

I have a 2014 800 cc dominator 4 door .. won’t move when you put it in gear. You can feel it kick in and see drive line jerk but when you hit the gas it won’t move like it’s in neutral.. any idea or help would be appreciated..