Real WiFi Trap DIY💥 / Free Internet Rifle V 2.0

Links:

[Ath_]

To everyone that says that it won't work:
In america you obey laws of physics
In soviet Russia laws of physics obey you

[kyium_]

Glad this channel gets an English translation.

[anandprasad]

Bolt length -1/2 meter
Small disc distance- 22 mm
Last 3 bigger disc distance- 12mm, 9mm and 7mm respectively

[craigwall]

Kreosan, I love your projects, and I'm really pissed off about the people calling this fake. Apparently they've never seen a disc-on-rod wave guide and don't recognize a Yagi with circular polarization. Thanks for this video. I was going to design my own but you've saved me the trouble. And BTW, your translation called your insulator a "gasket" and now everyone thinks the reflector and driven element disk are shorted. Your biggest problem is that your audience is just ignorant and can't figure things out for themselves.

[elektronikadlapoczatkujacy]

Me: I'm going slee...
*kreosan gives a video*
Me: OK, maybe not.

[zyrppa]

At 9:01 that is GPS antenna, not wifi! Connect any metal thing to other end of the cable and results will be same.

[doxielain]

Ah, remember 2004 when no one secured their wifi?

[chrismin]

FIRST ONE IS 90MM NOT 80MM AS IT SAYS ON THE VIDEO! Had to cross check with the russian Kreosan video and it's 90, not 80. You can see it later in this video as well.2:38

[wellboyscience]

With 75 ohm cable you will not get better results
Because most wifi adapters are rated *50 ohm* (VSWR is important(

[flyback_driver]

Another way to find the center of a circle is to draw at least two (but more helps accuracy) lines of exactly the same length and touch the outside twice. For example if you have a circle with a 4 inch diameter you can use 1 inch lines so long as all of them are one inch. Then go back over each line with a square and at the halfway mark draw a line all the way through. Each intersecting line will also meet in exactly the middle .

[GoatPopsicle]

You need to add in links for the extra products you use. For example: the antenna cable to USB adapter.

[yourelegantwaifu]

I want to see your video being reacted in Electroboom

[timgore]

You're probably losing most of your antenna's gain in that white coax cable. It's not made for 2.4 or 5 GHz frequencies. Also, is the driven element electrically connected to the reflecting element through the threaded rod?

[dt]

Super video! How (using which application) did you calculate the dimensions (diameters and distances) for making the antenna?

[vainboaster]

There is a Problem with the Two Disks that is connected to the stud without insulation thus shorting the antenna circuit. The second disk from the two disks that is connected to the wire should be insulated from the rest of the disks and stud...

[aldrinmilespartosa]

"No one can defeat the russian engine ring!!!!"

- strohiem but he's russian

[seanmayoaguirre]

Dude, I don't know what's cooler - the awesome sci-fi looking death ray wifi gun or the green automobile...I WANT THEM BOTH!!! Cheers, man. y'all are geniuses! If you came to Los Angeles you could probably trick the whole city into thinking you are INTERPLANETARY WIZARDS. Stay Groovy, Dudes. I Love the Videos!

[benjaminwesp]

I have build your Wifi-Antenna the way you told in the video. I am impressed! Instead of cupper i used aluminium but everything else remains the same. The quality of this antenna is unbelievable good!

[boubacartahirou]

hello I really like your videos. I have a question between iron, aluminum, copper and zinc which brings more signal?

[furekmody]

I love how this car says "na berlin"