String Trimmer Carb Cleaning

Carb Cleaner:

*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!

[Mikeattempts]

Carb Cleaner:

*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!

[JudahEyes]

You do such a nice job to allow the camera to focus on objects close to the lens, which a lot of people have trouble with. Keep up the great videos!!!

[mark]

Shout-out from down Under Australia, great video, thanks mate. 🤙🇦🇺

[glencabbage]

Thank you sir. I've got multiple gas powered machines that have quit on me and I'm sure that in each case, the carburetor is the culprit. I've been wanting to learn how to clean & fix them for a while now; your video is giving me the confidence to give it a go. Thanks.

[devo]

Keep up the great work… video quality, pace, and succinct narration puts your videos in the top 5% of “how to” content on YouTube. It’s only a matter of time, content, and massive luck until your channel blows up! 😂

PS I’ve had a similar set of Craftsman drivers for 30 years. Many things diverted from landfill with those tools :-)

[larryford-hqnb]

This was perfect. It was orderly video was clear, some acts were clarified. This was exactly my problem.

[BendcA]

So lucky for me that the first yt video I clicked on is the exact same problem I have with the exact same string trimmer. would not feel confident doing this without your help.

[PaloRodriguez-mpkk]

Exelente video. Explication muy Clara y Al Punto, sin salirse del tema amen

[clatonblade]

thanks for the video, .Mine would not start and was putting off cleaning the carb, it was actually really easy but that tiny little spring and needle. i did right by bringing it to my desk to get comfortable and take it apart. its a really old weed eater and always started great! 4 pulls choke, 1 pull half choke and away you go. was heart broken for a second it would not start afterwards! but turns out now that i rebuilt it it starts prefect first pull on half choke setting then runs great. i have no clue why lol. i had to reuse the old gaskets they were not great and the little butterfly flap thing the choke controls appears to work normal but now it just does not like full choke anymore.

[waleedacca]

Thanks for sharing, I'll follow same steps for mine

[maddmavic]

I have a cpl.that start n idle fine but bog to death when give throttle. Does that mean carbs dirty

[alanlambert-bzto]

That is the Carburetor that is on my (TB304H 4 stroke.) My problem is one of the 4 screws that hold the trimmer bulb on is loose and will not tighten. My shop I used to order a new carbwas sent the wrong carb. It had 4 hose connections on it. They ordered the other listed part but have not got it in.

[bobbaxter]

I've got a strange problem with an sgs 5 in 1 tool.Was using it today and this large hedge was kind of awkward and for a brief period i had the motor of the tool upside, it ran ok then started to stutter and break down then wouldn't start!!Now with it being upsude diwn i thought cwr problem maybe a bit of dirt got trapped somewhere, i've taken carb apart and cleaned it twice and it fires for a second like it wants to start but quickly dies.
I then checked for a spark and i couldn't see anything??Could the sputtering while cutting the hedge just have been the coil breaking down??

[yearRBLX]

Do u know what that spring is called so I can buy one for my carburetor mine is missing please answer

[beatrizperez]

How can I get just the diaphragm for a hyper tough 2020 2-cycle weed eater

[cexy]

posso chiederti consigli per un mio decespugliatore difettoso?

[Corney]

To bad the $20 Chinese carb kits on eBay come with the wrong throttle connections.

[thomasadams]

HE FOR GOT TO TIGHTEN ONE OF THE CARB MOUNTING SCREWS