Best DIY CNC Plasma Cutter

Going over the capabilities of the plasma cutter as well as what is included in the plans.

#CNC #Plasmacutter #DIY

[digitizer]

I can't say enough good things about these plans. I always wanted a CNC plasma cutter but wanted to stay in a small budget. This was truly the best option out there. On top of that JD's Garage continues to add upgrades to the CNC table such as the pipe cutting feature and recently added the floating head for Z axis and never charge additional for the updated plans. They even started work on a THC and I am 100% in once complete. I used this plasma CNC table almost 5 or 6 days a week and just love it. I had a blast building this and JD's Garage was always there if I had questions. Thanks Guys!

[GarageAndFarm]

You received a sub and purchase of the plans from me !! I have no immediate plans to build.... but for 25 bucks, I totally want to support fellow garage project channel and builder !!

[georgechambers]

I've had my plasma cutter for sometime now and as you say it works flawlessly. And I must say your kits are of the highest quality. Thanks for the video!

[laddjohnson]

Omg that CNC tube notcher is brilliant!!!

[mtyquinn]

I decided to tackle this build - with no 3d printing experience and no CNC experience. Bought a "Longer" brand 3d printer and made all the parts. Fabricated everything else in a weekend and had it all assembled and moving smoothly. Bought all the stuff listed in the list and then tackled the electronics. If I would have read ALL the instructions - I would have not had ANY problems - but a quick email asking what I did wrong was responded to quickly and within minutes I was back on course!!! My first cuts were not so great - and it turned out I had a very thin and wavy metal that caused lack of continuity on the plasma - and would "flame out". Put a nicer (not new) piece in and it ran flawlessly. I cannot say enough good things about the effort that these gentlemen put into these plans and project. I do not yet have the z-axis but will be ordering all the parts tonight - and they have a THC amperage management in the works too! My first few test pieces were 2" square and 2" circle to see how true this was running. Dimentionally I was 2.002 x 1.987 square and 1.994 round (there was about .005 variance around the circle). I will try and recalibrate as I think I might have been off in the Y axis... I am VERY pleased! I hope they sell a LOT of plans to make their efforts worth while! Thank you!

[darlopbgc]

Hey thanks GOD for people like you, that makes others like myself with less money possibilities enjoy having a machine like that and be able to accomplish something they could only dream of!!!! 👍🏽👍🏽👍🏽👍🏽

[gavin]

For anyone wondering about what the plans are like, I. Ordered and they were sent straight away. Very well detailed in clear steps.
Just had the last of the electrical parts arrive. Now need th have another read of the plans and connect it together.

Once I have that working I’ll order the steel tubing cut to length and all the printed parts from you.

[wetcoastfab]

Love it! I just ordered the plans. I'm no newbie when it comes to CNC machinery, having built CNC routers and milling machines and I knew it was time to get a CNC plasma cutter in the Wet Coast Fab shop. Rather than spending the time designing and figuring it all out, I pulled the trigger on these plans! I can't wait to start building it and putting it to good use, perhaps using the machine to cut out non-3D printer component replacements for the gantry, etc.

[calebsurpass]

I am sold. Bad ass guys, very cool product you have here. Looking forward to building my own - for sure will be buying. The notching of the tubes sent me into the stratosphere

[steveu]

I have mine almost complete on the assembly side will start the electronics by the end of the week. i hope the THC will be ready soon. Thanks

[flyinpolack]

Just ordered the plans, everything looks great!
Printing first parts as I type this, Ordering steel on Monday, can't wait!

[jakelords]

I bought mine and a few extras for another design as well. Fast shipping and great communication. I definitely recommend this if you want a true budget cutter! Thanks again!

[thefarmshop]

Can y’all please make a video on operating it. Especially the z axis touchoff and height adjustments . I’m having trouble making it do what I need. Thanks

[DroneNewbie]

I’m very interested in this, and think I’d like to do it, but was wondering if you’ve thought about how to make this scalable? In other words, can I build the small size you have plans for, then scale it up to a 4’ x 4’ or 4’ x 8’ or 5’ x 10’? Can the axis be made “modular” so you don’t have to rebuild an entirely new table for increased size? Looking forward to your response. :)

[vojtechvecera]

This is one of the best idea to build! Thanks for it.

[jbsradio]

I'm interested in seeing or hearing more about the rotary axis tube notcher.

[gryph]

And it's a cantilevered Cartesian design..bloody awesome!

[bobrossi]

Just got plans and kit with z axis kit very good quality I'm ready to get my steel and but I am going to increase my overall size to cut 36 x 49.5 sheet so I iam going to order 2nd kit to fully support grantry like the crossfire pro table . Plans are very simple and thought out. Order and build today

[barebooger]

Thanks for all you do and share! I'm looking forward to plans or a kit for the Torch Height Controller.

[verigone]

you can also toss a small 3 flute side mill to finish out your pill shaped holes with the rotary on a plunge base or pin router.