The Ultimate 3D Printing Test: Comparing 7 Different PLA Filaments! | Bambu Lab P1P Project

The Ultimate 3D Printing Test: Comparing 7 Different PLA Filaments! | Bambu Lab P1P Project

👀 What You'll See:

In this video, I compare 7 different PLA filaments by printing the iconic 3D Benchy. Using the same settings and calibrating each filament, I tested filaments from Bambu Lab, eSun, Anycubic, Sunlu, and Polymaker (including their Silk and PolyLite Pro series). I also explore whether pigment plays a role in print quality by comparing Sunlu Blue and Red filaments side by side. Watch as I analyze each Benchy’s quality, detailing the differences in surface finish, detail, and overall performance. A special thanks to my sponsor, Polymaker, for providing the filaments for this test! Don't forget to like, comment, and subscribe for more 3D printing tips and reviews.

🔗 Links:

Don’t forget to like, comment, and subscribe for more awesome 3D printing projects! If you’ve made your own 3D printed organizers, share them in the comments below—I’d love to see what you’ve created!

#3DPrinting #bambulab #polymaker_3d
---
Follow me

[necomecoo]

No offense but, while watching a video that gives me an idea about which filament to choose, it is a huge red flag when the reviewer says "polymaker is very good" and then says "the sponsor of this video is polymaker".

[TechCRS]

Hey I was really looking forward to this video comparing all these brands, however when you announced that Polymaker sponsored the video I was instantly disappointed as I think this is a bit of a conflict of interest...

A video about comparing filament brands and quality shouldn't be sponsored by a brand who you're going to use in the video itself. I know you threw bambu into the mix for the finale however both of the other options were Polymaker. I just feel this is a conflict of interest in an otherwise awesome video

[haroldo]

You are comparing regular PLA to Pro PLA from Polymaker, not really apples to apples...

[tomyocom]

Love the video. You mentioned dialing in the filaments. What is your procedure for taking an OFF BRAND, ( not Bambu) and using it with the p1p or x1c. what are the steps so that it works well? thx in advance. Hard to find this info. It would be nice if someone took 4 different brands of PLA and loaded them in an AMS to show how they get them to work with no RFID chips.

[xtrusion_ir]

How can we apply to test our filament?