How to use Hardware Send Effects in TotalMix FX

In this Video we will show you how to use external hardware send effects in TotalMix FX to boost up your creative workflow.

---------------------------------------------

Make sure you subscribe to our channel:

Follow RME Audio on Facebook:

Follow RME Audio on Twitter:

#RMEAudio #ZenDelay #Loopback

[chrispoole]

This video is big on the what, but I didn't understand the how, ie I found out a lot about what Totalmix can do, but I didn't get a handle on how I can do it. It might be me, but I have found tutorials by other contributors (Barry Johns for example) much clearer to understand.

[reallyreallyfreemusic]

Very helpful; thank you. I think I finally understand this. FWIW I think I'd prefer to record the effected audio to a separate DAW track so I can tweak the blend later as the mix becomes more finalized. Thus no need to set up a loopback channel.

[MarcusCorbett]

"note that the input channel 5 & 6 is the return channel from the hardware effect..." {at 2.02}. Only one problem...there is no sign on screen of 'channel 5 & 6. Clear as mud. How can we be expected to understand this ?

[sikfist]

Consumer Feedback: Add the ability to load 3d party plugins into totalmix and you will takeover the market.

A simple software update.

Happy New Years Rme!

[WhackABilly]

Can you do a video using the AES input/output on a interface and the routing in TotalMix FX?

[laurenceviegas]

Are there any videos from RME on how to set up send/return on ableton with total mix? I keep hearing the reverb mix with the main out :/

[keith.loves.lasagna]

Is this possible with XLR ports? I have a Babyface Pro FS and was wondering if I can do this.

That said, thank you for this demo!

[anthonydrentvevo]

Hey there, how do you send FX with RME Babyface Pro? There is a reverb on my cheap behringer mixer that I want to add to some dry vocals. Thanks heaps.

[Nenufares]

Is it possible to mix with the totalmix DSP plugins not at tracking level but mixing a recorded song? I mean make the tracks go out of my daw separately to the totalmix use the Eq and Compr for every channel individually, and make it back to the Daw individually? I have a UCX. I´ve looked for a video explaining it and I didn´t find it. Thanks

[LB-pppu]

Hi, I have a Digiface Usb, is it possible to create hardware sends like the one in this video also with Total Mix not-Fx like the one that comes with the Digiface?
I have a Digiface and 3x Adi 8 DS, I miss the passage in which you create the send/return submixes. Thanks

[EchoReverb]

CAN RME UCX1 can use main output Room EQ(TotalMix ) like UCX2? thanks

[PM-yzfx]

Hello, please could you tell me if I can connect a stereo reverb hardware effect on two condenser microphones and listening to the effected signal only through the headphones output of a Babyface pro fs? Also is it possible to do this without connecting the Babyface to a computer?

[ole]

what shall i do when i want to have insert oder send effects routing directly to a channel in my DAW(Ableton)? i dont know if i have to do my routing in ableton or in Totalmix?

[sdxr]

However unfortunately there is a small latency that you can hear doubling. Try dry signals. But still much better than other interface. 20yrs RME user all my converters are RME. 😊

[garrel]

Could this be possible with just a babyface pro fs, using the phone output that goes in send? Thanks

[aleixandorrabonet]

Hi, what's the difference between doing a hardware insert and a hardware send/return? I've watched both videos and they seem the same to me. Many thanks!

[kisho]

and how the othe way arround? How can one load a VST in TotalMix and send it to external hardware gear?

[TomiSimatupang]

Totalmix "tricky"to use with Cubase - to put it very mildly. I want to do something seemingly simple, which is to add an external Hardware insert to a track in Cubase. With any other interface it couldn't be more straightforward, but with an RME interface there seems no way to make the Steinberg routing work hand in hand with Total mix!

[alfieholloway]

How can I do this with the babyface pro? Can I use the headphone out to send to a compressor and back in via the line/instrument input?

[markstanding]

I don't understand any of these videos. I can't see it explained how to set it up to monitor just the returned (FX) signal only.

I have it I can play an uncompressed track in logic (bass or vocals etc), it goes out of Analogue 1 (XLR) into a compressor, back into line input (instrument 3), but I can hear both the dry signal playing in Logic plus the compressed signal, I just need to be able to hear the compressed signal for the few seconds or minutes while I'm dialing in the compressor settings.

So it feels I need some kind of extra 'submix' or something in the control room, which only has, for example, the line ins feeding it, so I can only hear what's coming out of the 'line in', and not hear what is coming out of Logic (although obviously that still has to be playing and going out of the XLR AN1).

All of these videos seem to have a different Totalmix setup which I can't equate with mine, and then they seem to reference things I can't understand.