Ps2 disc read error

Показать описание

Any help would be appreciated. Discs won’t read as they always stop spinning.

Dan Delaney

Рекомендации по теме

Комментарии

You can fix it by applying a little bit of pressure on the dvd or putting a tissue half side in and the other half out with closing the lid

yhm

Before you pop in the disc go press triangle. - hover over “console” press triangle again and turn on diagnose - then pop the disc back in and it should read

Bigmactrapn

Clean the laser w isopropyl and adjust the potentiometers! If that doesn’t work you should buy a new laser.

holyhornet

Still in the process of getting mine fixed, also DBZ Budokai? Man of culture I see

dynamosavage

I just say clean the laser lens or get a new laser/whole drive but if its only the laser just get the laser and a ribbon cable for the laser that can cause issues too

hectorlopez-nkyt

If anyone having this problem still the slim version of the console has a ribbon cable poking out from the laser when the adhesive on the back wears away the disc scratches the ribbon cable eventually the ribbon scratches and stops the ps2 from reading the disc, look at the bottom of the your discs if there scratches, check the ribbon by gently pulling the laser across. If so you can buy ribbons for cheap but make sure its for you model. Hope this helps

michaelbutler

Try cleaning with Isopropyl Alcohol 91% clean the laser and laser eye lens on the disc drive. If it’s still not reading disc, then replace the laser.

martin.aguilar.a

You need to adjust the potentiometers on the laser assembly. Counter clockwise should improve/fix it. Yes there's 2 of them. One is for DVDs and the other CDs, do both

Timmymantwo

And then the infamous red screen of death pops up

MattAutoMotive

I have the same issue with 77004 console. Tried adjusting the potentiometers. Dvd to around 1042 ohms and cd to about .523 ohms. Based in a video on YT. Now the issue has worsened. Moral of the story - use a multimeter and remember exact measurements.😂😂 It used to spin like in the video and now only the laser moves but does not spin at all. I read an article and unless someone tinkered with the it is pointless to try to adjust. If in any other case it works you should just clean the console.

didakad

In my PS2 only 1 sensor which is infornt of power button what should i do in reading disc error now plz suggest

raheelsiddiqui

so what do i do? mine makes that weird "eehnm" sound then the whole system shuts off!!! do i just find something to hold the button down or is there more to it? it wont spin discs, and when it makes that weird robotic "eeeh" sound it just shuts the whole system off.

Aight__