How to Replace Headlight 2011-2016 Hyundai Elantra

This video shows you how to install a headlight on your 2011-2016 Hyundai Elantra. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.

This repair was done on a 2013 Hyundai Elantra GLS 1.8L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Drill
• Safety Glasses

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[samvogenauer]

Thank you for this, your process of how to remove and install the whole assembly is awesome. What way to pull/lift etc... I remember the first time I changed my wife's driver bulb I struggled so hard to get the assembly out and back in

[JayOnzs]

You guys showed the easy side. Drivers side is much harder

[donnaledesma]

I have a 2015 Hyundai elantra. My car has projector headlights. Am I able to completely swap out the headlight for traditional headlights ? Or would the wiring /fit be different?

[TheDudeFrom]

Hi. Just wanted to ask, what is the bottom of the low beam? There is a small bulb. Not sure whats it is for.

[jorgehernandezdominguez]

In others videos they don't take out the assembly (only for the driver's side) Is there any benefit in doing it like this?

[southsidehg]

The bottom clips of the headlight whats the part that those bottom clips connected to

[vicvolpe]

You don't need to pull out the headlamp assem on the pass. side. Unlock the large round cover, unhook the wire clip, and twist the bulb. a 5-minute job.

[jerendevilliers]

Y’all should make a separate video for the Elantra GT, since the bumper and headlight shape/style is completely different.

[StillMantis]

why do none of these videos tell us which bulb is needed

[kmmkmb]

I went on the site because the entire headlight replacement (deer. It’s cracked) is needed but I didn’t see it….

[Snicketbar]

Removing an installation is easy. I just want to know how to swap out the guts.

[charlespugh]

Just as useless because it doesn’t actually show the driver side assembly removal.

They are not identical