4 Wheel Drive Lever Stuck!?

4 wheel drive lever stuck, came across this while doing the cable shifter upgrade.
As far as the bushings I can’t find any online, if you can find any please leave a comment and link to where it is because in this day in age these old 90s jeeps (and older) have a lot of rusty crusty crud everywhere, eventually I’ll have a rust proofing video.

I didn’t expect to have my 4 wheel drive lever or transfer case lever stuck, seems like an un common problem because it was the rust under the plastic bushings where most are stuck due to a mechanical problem, if yours is stuck take off your center console and the guiding gate, take a peak down there squirt some WD-40 around there and see how bad the rust is, it’s a possibility that could be why it’s harder to shift and possibly not the linkages fault.

If you like videos like this then punch the like button and subscribe because most of my videos are strange problems like this and solving them 👍

[goodtimeeric]

I owe you a beer. I think this is my issue.

[Beatsonlite]

i ve been working on my mitsubishi GDI IO and the shifter is stuck

[sheltonfoerster]

I need new bushings. Any advice? My lever broke because it was so stuck and rusted. Need help!

[davidgarza]

I am working on a 2001 Jeep Grand Cherokee with V8 automatic full drive. And it will drive in 4 wheel drive. But when you take it out a 4 wheel drive, it acts like it's in neutral and they won't drive into world drive. What could be my problem?

[iliketurtles]

Hey what if the arm is loose and isn't doing anything when pulling back and forth