Episode 5 Replacing Aventon Aventure E-Bike Front Fork

preview_player
Показать описание
A how to video to replace the Aventon Aventure E-Bike front fork which was covered under warranty. Easy to do with minimal tools.

Amazon Links in Channel Description
Tesla referral link:
Рекомендации по теме
Комментарии
Автор

Really helpful video local bike shops trying to charge me at least $300

gilesotojr
Автор

Watched all your videos, great job 👍 Thanks for sharing a real world experience. Just ordered a pair of step throughs for the wife and I 😁

RC
Автор

I screamed at my monitor when I saw you take out the hammer and screw driver!!! Interesting (and disappointing) that Aventon didn't send you instructions for removing and re-installing that bushing (would have been even better if they were to send you the jig to safely push the bushing back in). Thanks for posting this - I would love to know how that bushing was supposed to be re-installed (I'm assuming a sleave that slips over the stem that you can tap-down but I've never replace forks before so I'm just guessing).

TheRealBarkinMadd
Автор

Thank you for the video! Do you know what the specs are for the factory fork? I would like to find a upgraded fork that fits our bikes.

ralphpitcher
Автор

Do you have a link to the seal you purchased? Mine did the same thing, was loose when i took it off

joeysane
Автор

I'm wondering if you can replace the stock zoom with a Fox fork. Any idea? Thanks

ForbinColossus
Автор

Thank you for this video. Aventon just sent me a new fork cause my original one had a clanking sound. I am not a bike guy but I am generally mechanically inclined. So I thought I can install it myself with no instructions from them. However mine didn’t come with the starnut in the fork. Now I am stuck with no way to finish the install, and have to figure out how to buy and install that myself. Yours came with it preinstalled, correct?

chamathguneratne
Автор

That piece you hit and broke. I’m guessing it’s some sort of bushing. How do you properly place it in? Because I just applied some pressure on the fork to let the bushing fall through and that seemed to fall into place. Question: does the lowest ring with the Aventon logo spin freely, even after tightening the final bolt?

UnOeufff
Автор

Can you confirm the Aventure uses a straight steerer tube 1 1/8”? Aventon told me tapered tube, but to me it looks straight from your vid.

tatummonaghan
Автор

Where did you get the fork ring? Did not find on Amazon. Mine is not damaged but does not want to go down and seat in. Mine was also out when we took the stem off.. Dave....

DangerousDaveKincaid
visit shbcf.ru