Project 4L60E part 2 lesson 7

In this lesson we assemble the front pump,test fit the input drums and install these assemblies into the case.

[mrfixit]

I’ve been a self taught builder for about 15 years and you are the MOST Thorough person for lessons, that anyone should be able to build one you are awesome

[JS-pvxx]

I never realized the benefit of YouTube years ago when it came online until I seen videos done like these. Thank you for taking the time to give free information. Very good quality! Thanks!

[rivenmotors]

I just rebuilt my 2007 Chevrolet 4L60E following Jimmy's tutorials and it works again! Fantastic video series and presentation. Never thought I'd attempt this procedure but he made it easy as well as ordering the parts I needed. Highly recommended, thanks Jimmy!

[Wipsplash]

His calming voice and excellent instructions make me feel like I can achieve this rebuild.

[shannonsisk]

Better video instructions for rebuilding a 4L60e simply do not exist. I cant thank you enough for these videos

[andyncry]

Great videos!! I'm rebuilding a 4l60e out of a z28 Camaro I'm almost done with it.. I really thank you for these videos..

[outdoorzone]

Excellent 4L60E series! I will use these to rebuild my 700R4 again in future!! Basically the same as far as I can tell except the valve body is a little different of course!

[jeffcasper]

Hope this helps someone but a 10" air duct clamp looks exactly like that tool aside from a hex rather than a wing nut. Got mine at lowes for $2.18. Worked great.

[russ]

Love this video series. I'm gonna attempt to rebuild my own. Great job on your explanation

[jakeparker]

If you put the pump halves back in the case backwards, it will line up the pump for tightening.
Also, several large diameter hose clamps screwed together will work.

[dickmick]

Why would you not chamfer the bushing before installation? This would keep the debris out of the transmission!
Well done, concise and understandable.

[topfell]

Good teaching no bs simple and to the point will use his kits

[martinloic]

Toujours de vidéos au top .
Il manque juste les couples de serrage !
Pourriez-vous les donner ?

[jrsubuntu]

Thanks for the video. I will be telling my friends about this video and your channel.

[richardhargis]

Great videos, So I rebuilt my 2008 4l60e in a 2008 Hummer H3 5 cyl. It shifts fine from first to 2nd but shifts into neutral when trying to shift to third and there is no reverse.

[josevictormanzanilla]

Excelente explicación maestro, gracias saludos d ver, México

[wazzaracer]

on my 2005 year 4L60E there is no large seal on the pump body, instead the case itself has an insert/seal that is a snug fit against the pump body when it is installed in the case.

[sergiolongoria]

este video es excelette esta buenicimo vealo lo recomiendo

[perverso]

mr williams one question . you use a inch pound torque wrench and tight pump bolts to 220 . its ok to use a ft pound torque wrench and tight them to 18 ft pounds ?

[rafaelnunez]

Gracias muy buena lecciones felicidade