Ford Fiesta (2013 - 2017) - Replace the front brake pads

Do you need to Replace the front brake pads on your 2008 - 2016 Ford Fiesta but don't know where to start? This video tutorial shows you step-by-step how to do it!

What's covered: 
Petrol:Ford Fiesta 1.0 litre (998cc) turbo (EcoBoost) 2013 - 2017Ford Fiesta 1.25 litre (1242cc) 2013 - 2017Ford Fiesta 1.6 litre (1596cc) 2013 - 2017
Turbo-Diesel:Ford Fiesta 1.5 litre (1499cc) 2013 - 2017Ford Fiesta 1.6 litre (1560cc) Duratorq TDCi 2013 - 2017
Exclusions: 
Does NOT cover 1.0 litre non-turbo (Duratec) or 1.4 litre petrol engines, or 'Mountune' or 'ST 200' versions (with 1.6 litre EcoBoost petrol engines). Does NOT cover new Fiesta range introduced July 2017.

[NeverBeenThereBefore]

Great how to video.. no extra chat, just focused on the task at hand.

[jettrink]

Thank you... and we didn't have to listen to your life story either.

[AT-ktwy]

My brakes are slightly spongy after changing brake pads and are initial soft until I press the brakes a few times. I had to bleed the brakes for the caliper piston to reset.

[rxvrgvo]

how important are the anti raddle clips?

[TheBracani]

what tools and size of the tools are u using here?

[vannquishgaming]

What do I need to look for on the brake pads to see if they require changing?

[pmangham]

Good video. Just one query, why do you recommend replacing the guide pin bolts?

[johnbull]

Where to the axle stands go and where is the jacking point?

[OhDannyBoyyyy]

I've done this and I didn't have new anti vibration clips so is that why I have a little clicking noise when driving now?

[pencilpusher]

Does it require bleeding the brake lines when fitting new pads or not?

[mattyohanlon]

Great video! Just wondering do
You have to remove the brake fluid reservoir cap prior to doing this job or can it be left on?

[justadude]

Thanks, spent $30 + $10 shipping/tax on a front brake pad kit instead of $400-800 at the mechanic shop.

[stevegraham]

why no copper grease to save brake squeal.

[GordonBlachford-utts]

It isn’t good practice to use copper grease on brake pads, as the grease will gradually dissolve and the copper particles will restrict movement of the pads. You should use high temperature grease.

[kungfujiujitsufliptrick]

What if after u do all that the wheel don't turn even when the breaks arnt pressed? Bad caliper?