How to Install an LED Ultra-Thin Wafer Downlight | Lithonia Lighting

The LED Ultra-Thin Wafer Downlight from Lithonia Lighting is an easy to install recessed lighting solution for any ceiling, including those with a shallow plenum. Learn how quick and simple the installation can be.

Like us on Facebook:

Follow us on Twitter:
@1000bulbs

[joeo]

"Pull electrical wire" ... Where did that come from? Was it disconnected from another light fixture?

[indyfanmax]

Im familiar with this model/brand of wafer lighting. I wasnt aware the j-box cover was removable. Hows that possible? Not being able to remove it makes multiple romex connections unbearable, but, do-able.

[GuneTools]

Is it possible to have a longer cable from the light to the driver box so the box can be 'remote'. I have a concrete ceiling where I could run the cord through a conduit to the remote driver box concealed by a cabinet or other means. The junction box (power source) would be located in cabinet and provide power for multiple drivers.

[alkayemediagroup]

Can these be daisy chained or does each light have to run to a ceiling box?

[karenwasson]

Installed 9 of the WF3's in a walk in closet. They seem to work properly. except when I dim them down to the lowest they will dim, 2 of them are still lit. Using a LeGrand Adorne touch dimmer model ADTH700MMTU. Now thinking maybe I need a ADTH4FBL3PW4 0 - 10V model, but there is no purple and gray connection on the WF3 driver box.

[danman]

Don’t the J boxes require an NM clamp?

[GavHim]

if a 2nd light is purchased, can the music be linked together?

[sencill]

There are 2 black and 2 white wires coming from my ceiling but the light fixture I bought only has 1 white and one black. Can someone please explain how to connect these?

[JohnDoe-xlqs]

Can you get different color Lenses to use these in Bars or restaurants.

[ruhullahgulzai]

Can you please make video of how to connect them in parallel and in series

[calledandcommissioned]

So can I just run another electric line from one light to another since there is a third slot in the waygu connectors

[remkye]

Things to note and not mentioned.
- when cutting try using a knife for sherock on first hole to make sure there are no water lines above you, especially if you got a 2 story home with washer upstairs.
-make sure there are no beams/studs where you cutting because you will have to re seal hole and move it somewhere else.
- if installing multiple make sure they are all squared, i used a fishing line, nails and the paper cut out circle to preposition them before making any holes, the fishing line helped to make sure they were straight and you wrap it around the nails in the center of each cut out and edges.

[jlongjr]

When you remove a knockout, at 1:48, do you need to install something to secure the wire?
Also do is it really ok to leave the driver box just sitting on the ceiling and not secured?
Last question, and I can probably look this one up, can you put insulation over the top of the light?

[danielmendes]

Can these work with any dimmer switches

[JSchsacredthreads]

My house has no attic. Can these still be installed? I could really use the light!

[MrJohnpro]

If I changed my mind about location how do I get the wires out of this? Just cut them?

[edh_alters]

I'm installing one of these in a small nook this weekend. Only thing different that I'm doing is putting a 3/8" clamp connector in the knockout to secure the romex inside the j-box.

[McGovern]

How strong are the springs? Would they work in a drop ceiling?

[waq]

Can i replace these lights after they are installed? I installed daylight ones but want to change to warm white at some places.

[tremblz]

If I wanted to install 6 of these off of the same AC power line, is it possible to connect an additional wire in the remote power box to feed the next light in the series?