Ridiculously Easy LED Strip Install! No drilling, No Splicing, No Soldering!

=============================
Support My Channel Directly:
==============================

The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

#GoveeM1Matter
#SmartHome
#HomeKit

[ChrisMaherDIY]

Support My Channel Directly:


The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

#GoveeM1Matter
#SmartHome
#HomeKit

[busterboy]

Ridiculously easy for people who have done this kind of thing before

[spacefootballer]

hey chris....do you have any recommendations other than muzata? i cant get them here in germany and everything else i found on amazon while searching on my own was just the standard flat or angled stuff with not much spacing inbetween...(hotspots bs)

[Revell]

Have you thought about using govees neon rope strip? Or you could even use the gaming strip that lays down flatter they advertise for the front trim of a desk. Would save yourself the diffuser process I would imagine unless there is something to it. However, I will go the same route when I do this unless their coming soon matter releases are out in the near future. I love apples HomeKit ecosystem ever since I switched from Alexa and having a dashboard to control everything from an iPad I mounted on the wall

[CrinosAD]

Nice tutorial!
Regarding the 45 cuts. I have the same Ryobi mitre saw. If you set it to 45, partly lock it, and give it a slight nudge then lock.
Ideally you should have 44.5 degrees. The (combined) 1 degree is covered by the joint. In worst case scenario, if you do get to much light bleed, you could always solder it from the inside. Just melt some tin and let it run into the opening.

[jstreifel]

Cool picture on your UST projector screen! Where did you get it? What is the name of it?

[ayrtonfineout]

Chris, can you please make a Govee M1 strip to WLED controller setup? Or suggest a light strip that has 24v and RGBW that's compatible with the WLED controller?

[JDSTROKER]

Lazy man's way, with lots of money not cheap that for sure, in Canada anyways.

[SpyrhoTheOneManArmy]

I had a big issue with Govee desktop app they can see what you do on your pc when installing I highly not recomend to use the desktop app found over 50 dll hacking tracing and scanning data

[wverbrug]

can you make a video about the govee rope light for desk and show a way how you can easilly make your own one.

[joseluis]

Hello, I have a question, how do you connect the last piece of led strip to the plug? if that piece of led strip ends without connection, since it is cut

[Kurtis]

You should really preface that you purchased 3 of these for 3 controllers to achieve this look. Most people would think you could do this with one controller

[samleslie]

Great video and content as always. Can I ask where I can get the tv wallpaper?

[imlon]

Whats the advantage using Govee vs doing a ESP8266 chip and getting lighting from BTF-Lighting. Is this your preferred setup? If so / if not, why. Cheaper? Easier? I need to add some more, currently all mine are ESP8266 and BTF lighting.

[Eminent_Vlogs]

What’s the difference really between the 1 meter and 2 meter version I’m trying to debate on which one to get please help

[kevinw]

8:19 God bless you and your household, brother

[TienTran-bijv]

I'm a bit confused here. Let say when you buy the strip. You get one controller? How did you get extra controller? Can you share link you buy it.? You can just cut any led light strip then reattach to another Controller so then it work again?

[dnipro]

Another fantastic video, Chris! You probably tired of me asking, but floating shelves project, please?

[TheFolkTube]

Where do you get your screen savers?!?! Those are 🔥

[Spiriax]

How come you didn't have to solder anything in this video? Is every separate strip (all 3 of them) connected to a power outlet at the very right? It seems to go against your "Govee M1 cutting / reconnecting" video.

I noticed the color was different with the white towards the very end, why? You use Govee M1 for the entire thing, no? Thanks!