Theory + Problems Control charts for variables, x bar chart , R chart, statistical quality control

Solve Problems on Control charts for variables by using-

1. Control charts for sample means ( x bar chart)
2. Control charts for sample ranges ( R chart)

A quality inspector took 5 samples each with four observations (n=4) of the length of time for glue to dry. The analyst computed the mean of each sample and then computed grand mean. All values are in minutes. Use this information to obtain 3 sigma control limits for mean of future times . It is known from previous experience that the standard deviation of the process is 0.02 minute.

A company manufactures screws to a nominal diameter 0.500+- 0.030 cm. Five samples were taken randomly from the manufactured lot and 3 measurements were taken on each sample at different lengths. The readings are shown in table.
Calculate Co trolley limits on x bar and R chart and draw the chart .
[ Dayalbagh Edu. Institute Agra BBM May, 2010 ]

Please refer my following Playlists , Links are given:
1. Theory of Machines or Kinematics of Machines play list

2. Fluid mechanics and Hydraulic machines playlist

3. Refrigeration and air conditioning playlist

4. Renewable Energy engineering or Non-convensional energy sources play list

5. Dynamics of Machinery play list

6. Engineering graphics or Engineering drawing play list

7. Engineering Mechanics Playlist

8. Power plant engineering play list

9. Engineering Thermodynamics play list

10. Heat and mass transfer play list

11. Operation research play list

12. Strength of material playlist

13. Control Engineering/ Control systems engineering playlist

[jyotip]

nwhich value will be taken as n (sample value or or observation value) in before problem u take tha n value as sample value but in this vdo u take as observation value