How to hang your 3D Prints - EASY!

If you 3D Print as many helmets as I do, you probably need a good way to display them! Lets 3D Print some helmet mounts and get these properly on display!

Thanks to @ElegooOfficial for Sponsoring today's video!

OffEarth3D

Helmet Mount by CorvettePhil

Helmet Mount by Bugman_140

Make your own Resin 3D Printing Timelapses with Resinlapse ➜

Some links on this page are affiliate links that help out the channel.
________________________________________________

_______________________________________________

________________________________________________

________________________________________________

Thanks for watching!

#3DPrinting #wallmount #elegoo

[wyw]

Shelf liner/carpet anti-slide pads might be a workable helmet positioning add-on.

Modifying that hanger top into more of a "halo" shape may give you more surface area to apply increased friction for holding helmets in mildly gravity defying orientations.

[RZK_Props]

I printed the Galactic Armory mounts. Has both table top and wall mount options and the same wood dowel idea. Table top works great for painting, wall mount for displaying.

[keg]

Save money buying dowel, go to broom handle section of hardware store and get a straight handle it will be far cheaper!! I got 1.8m breo one for $10 but the dowel would have costed nearer to $30.

[RBallarddesigns]

Velcro to hold them in place. The loop side in helmet. Hook side on mount

[ResinForge]

Uncle Buc-ee 😁 The display looks awesome!

[shervin]

0:03 Uncle Jessy never fails to disappoint! :D

[davewhite]

I use this one! it's fantastic :) Old wooden broom handles work too!

[DPrinterAcademy]

Looks great, your space is coming along nicely!

[christophlanger]

Very very nice 👍🏻 🤩
Where can i found the STL from Sauron ?

[donnymiddlebrook]

If you make the top part more of a disc-like design, that may allow you to hang the helmets without them falling forward.

[angelikakurowicka]

You can try to print a piece in the middle of the pipe so it pushes the helmet forward and support it on its chin. Also if you make it a slidable piece, you can make it for any kind of helmet.

[xxxxzorroxxxx]

You could always add the Velcro of course you put the soft part on the helmet and the rough part on that device

[MajChronic]

I used my 3d pen and some TPU to put some lines across the top of my helmet stands. It works quite well and was easier than cutting out foam pads.

[figuresix]

Jessy, can you give us link to that Sauron helmet. There are a few out there, but that one looks really nice.. Thanks.

[christopherbaez]

This is very cool!! Def gonna try it, what I’ve done in the past with helmet stands to keep the helmets from moving is using thin foam sheets and adding them to the inside of the helmets with masking tape. that seems to do the trick. Kudos!👏🏼👏🏼👏🏼

[MigMonkey]

I just use good old EVA foam for helmet stand tops. Super cheap, easy to attach with a dab of hot glue, and you could probably turn the Top section of the print into a printable template easy enough.

[thenextlayer]

Nice! But please paint those dowels black!

[FinalMirage]

Just spray them with plasti-dip! I did that with my mounts and that gives them a rubber coating and they hold in place great

[DaveRigDesign]

add a adhesive velcro tab to the inside of the helmet and the wall mount

[juanjorf]

A good option is bluetack, a little bit adhesive but without leaving residues