EG4 Wallmount Indoor 280Ah Lithium Battery: Maximize Your Energy

preview_player
Показать описание
Join us as we explore the setup and features of the EG4 WallMount Indoor 280Ah Lithium Battery. This video provides a detailed walkthrough of the installation process. Discover how to maximize your energy storage with the EG4 WallMount, designed specifically for indoor use but equipped with features to excel in any environment. Whether you're a novice or an expert in energy solutions, this guide will help you harness the full potential of the EG4 WallMount Indoor 280Ah Lithium Battery.

Be a part of the solar revolution with Signature Solar!
--------------------------------------------------------

--------------------------------------------------------

--------------------------------------------------------
Recommended Solar Panels:

Рекомендации по теме
Комментарии
Автор

Good timing! The delivery truck just dropped two of them off today! Thanks!

rpsmith
Автор

gonna build a new home soon, I will be calling when I start

larrymeadows
Автор

Thank you so much for doing these types of videos! I find these incredibly helpful. I'm going to go with a Signature Solar kit when I am able!

kojakdurham
Автор

🌈❤🧡💛💚💙💜 I am one VERY satisfied customer of Signature Solar. I live off grid in a small house, and my first inverter was an 8K that gave me many issues. Signature Solar staff and tech support were amazing. Knowledgeable, patient and they helped me to troubleshoot the issues involved even though I started from knowing zero about Solar Electrical Systems. When it became clear the inverter was faulty, they stepped up and allowed me to replace it with the 6000XP inverter featured in this video. What an amazing and efficient inverter. I now have virtually all of the 110/220v power that I need to heat, cool and run all my electrical needs. Signature Solar was completely accountable for seeing that my issues were resolved and leaving me with a great inverter. Thank you Signature Solar for your great support, great company, and great customer service staff.

publicviewmedia
Автор

Another excellent training video. Keep them coming.

KentWarnick
Автор

Does the BMS rely on passive or active balancing of the cells? What kind of cell deltas are folks seeing at higher voltages of say 56 volts or 3.5v per cell?

MyGoogleYoutube
Автор

I appreciate the video and have a couple of questions. You advise turning the inverter breaker on then turning the inverter power on, and then turning the battery breaker and power on. Without the battery being turned on first, does it make sense to turn the inverter on? How would you know it's on since it wouldn't have power from battery yet? Does this assume power from grid? If the system is off-grid, should the battery be turned on before the inverter is powered up?
I am paralleling three EG4 batteries to a Magnum inverter, which is not supported so I won't have communication between the inverter and batteries. I am trying to confirm the communication cable port locations for the three batteries. Is this correct?
Master battery - Comm Port
Second Battery - in from Master at Battery port, Out at Comm Port to Third Battery
Third Battery - in at Battery Port.

frankenstake
Автор

Hi Kelly, would it make sense to connect the inverter battery leads to both batteries instead to just 1 battery? (so that all batteries are the same distance to the inverter). Example: Connect inverter negative lead to battery 1, and positive lead to battery 2, then parallel the batteries with the paralleling cable as per usual?

marcellowithtwols
Автор

How many panels would be required to fully charge the battery and keep it charged as a backup power source in an outage?

banditdog
Автор

Why wasn't the black negative power cable from the 6000xp attached to battery number two? it is important to load balance the charge and discharge of the batteries. with 600 amp bus bars that would be the correct connection.

stevenfrazier
Автор

Hi Signature Solar,
I bought this EG4 indoor battery without thinking about the inverter I had installed on the 8.4kwh solar system. Silly me
Questions1: I have the Growatt MIN7600TL-XH-US inverter installed. Will this battery work and communicate with it?
Question 2: Can i run 2 of these batteries in parallel on the same inverter?

seunni
Автор

Hello- do the 2 batteries need to have the same SOC before we parallel connect them?

linkinanytime
Автор

Ok so I have two of these now. Which part number do I need to correctly terminate the included wire so I can connect the two together? Thx!

marcellowithtwols
Автор

Why can’t these batteries be laid flat? I was hoping to use them under a floor and would need some that can be laid down. I know the manual says they need to be stored upright but I’m wondering why?

mutchler
Автор

Is there any such thing as simple software update instructions? I can not make any of it work.

jerryhicks
Автор

I bought the 18k and two indoor wall mount batteries package. Still in the box. Because it came as a package, does it come ready to parallel the two batteries?

michael-orc
Автор

So i can hook this up to a growatt gridtie min model?

angloblaxon
Автор

I already have 5 rack mount 5kwh batteries hooked up to a EG4 6500 hybrid inverter/charger. I want to eventually buy another eg4 6500 for 240vac for charging an EV. I presume that
I should just hook up a wallmount 14.5kwh battery to the second eg4 6500, not parallel all the batteries?

richardservatius
Автор

hi can you address this tid bit im concerned because i purchase an eg 4 6000xp and the the 280 ah bat.then came across this -"6000xp is not UL9540 certified.

justanotherdillhole
Автор

It is NOT more cost effective than the Riuxu 48V 314Ah (16kWh) wall mount battery for $3K US. Not sure how long till they have their UL certs (they say soon), but when they do... Main things both batteries are missing is a good active balancer and class-T fuse.

URackADisciprine