HOW TO DISCHARGE TV CAPACITORS SAFELY, DAILY TECH TIP 4

preview_player
Показать описание
HOW TO DISCHARGE TV CAPACITORS SAFELY, i Really recommend 3 watt resistor to drain the capacitor
VIDEO SERVICE TUTORIAL DISCHARGING CAPS,
Рекомендации по теме
Комментарии
Автор

Not really safe.... if you hold a resistor with your fingers and short a big capacitor you will definitely burn your finger. Some resistor even blast. Safer way to do it is to connect a multimeter and select a voltage higher than the one stored by the capacitor and simply measure the voltage. The multimeter will measure a pick voltage and will suddenly drop, no spark, no heat, not danger. 

monteiro
Автор

yea dont do it with the flat head worst thing you could do and when he says it could be little spark really take into account he said "could" ive done this and it was a very very big one because i followed his advice

Mediskin
Автор

Watching this, then I would assume that in handling a board like this, I'd watch out for putting my thumb over the two terminals while holding it...no?Or, how about those much large caps on hifi gear, or old radios? Would you use the same technique or something safer? On big hifi caps, is it safe to hold a resister like that to terminate the caps? Should I be using a much bigger resistor...etc....

sclogse
Автор

An LED diode would be good also. you would know its fully discharged when the light dies

Hotecce
Автор

Nice video ;

Could you make a video on how to read a schematic and best troubleshooting procedure when you don't have one.


billb
Автор

Not true. A small capacitor can hold much more voltage than one the size of a coke can. Check the voltage rating of the capacitor.

TheMrRatzz
Автор

Just subscribed.  A wealth of simple info here.  Thanks!

ThePreacherProclaims
Автор

Please stop giving bad advices.
Never use s screw driver to discharge caps. You will damage the cap and other components as well.
Use a resistor with a big value and wattage, don't hold it with bare hands, hold it with an insulated wire

chaosandorderstudio
Автор

Creating a dead short with a screwdriver is a good way to short out your board. This guy failed Electronics Tech 101.

jhs
Автор

How long after unplugging do they old the charge (and risk to get shocked?)?

fattirevsbud
Автор

What if the capacitor was connected to a bread board and we took it out, would it still store voltage?

arzanipour
Автор

Getting a shock for TV capacitors is not fun

SineHacker
Автор

Was gunna do this on my tv but my dad wouldn't let me

zboy
Автор

wtf did you just zap your wii with a tesla beam?  that must be a trick right?

shardfilterbox
Автор

I have a 4.2k omh 10watt resistor to discharge caps

manwlis
Автор

This dudes trying to teach people how to hurt themselves. Lmao. Yes you are Indeed discharging the caps, but not safely. So little Johnny learns this is okay, and tries it with a bigger farad cap. Little Johnny is no longer with us today.

fanningconstruction
visit shbcf.ru