Repaired no power Kipor Generator KGE3000Ti / IG2600

This Kipor KGE3000Ti / IG2600 was received for free from an old camping site. It looked pretty good, but i was told that the generator did not work.

In this video you will see me unclogging the gas tank filter and carburator, making a new base plate and fixing something that in hindsight was an unbelievable easy fix.
I did so much more testing than what i could fit in the video, but i left some of it in anyways.

Maybe this problem relates to the problem you have with your Kipor generator. If so, please leave a comment, and let me know how fast you figured it out.

I drawed out a simple schematic diagram with measurements for all the wires. I'll add it to the video, or you can leave a comment if you want it quicker.

[fritsschouten]

Excellent video. I had the same problem on my KGE2000Ti and fixed it the same way you did.

[LewisAraujo]

Thanks for your video. I'm trying to figure out what he problem is with my Westinghouse portable igen2200, it started fine, the power is present only for two minutes then overloaded led in red lights with only a fan running for test, and the power goes out. I'll check step by step as you did and cross my fingers.

[pierrevuur]

Great video, respect for you persistence and skills !! It helps me to open the machine.

[t]

Keen on the diagram bro. Thanks for the video. I have a Honda eu20i hoping I can adapt the honda copy inverter board to (in my case the DU20 kipor part)

[epoliim]

Good to know about this possible issue for future error repair. Thank you!
Maybe someone have experience or any suggestion in following matter. My Kipor IG2600 generator started to kicks back when to pull cord. Not every time when to start (pull cord) but randomly. Sometimes seems like problem gone and then few next times when to start kicks back again. That's why I afraid to pull quickly-forcefully, it may hurt arm seriously when kick back. Also quite often hard to pull rope especially at the beginning. I know that normally there is small compression but sometimes it feels too much.
This problem appeared already many years ago and MAYBE (not sure) after this when I tried to start generator, start recoil stucked. I waited few minutes and tried again but somehow lost rope handle from my hand and this rope handle broke case and rope pull-back case as well when returned quickly. I repaired it by myself. Maybe something went wrong. Then it was almost new generator, maybe after 3rd full tank.
One Kipor UK dealer-repair shop responded to my request for help that ignition trigger on the flywheel needs moving 1.5mm. Clockwise. At the same time others saying that ignition adjustment in such inverter generators not possible.
One local repair shop adjusted the valves (as one possible solution) but still have same uncomfortable problem. I think there might be compression release issue. Thanks in advance!

[jamie]

excellent video - thanks - almost ready to try and fix my Shultz genset

[andriusgeciauskas]

@Random Repair and Restoration hey do you know how to reset overload button? we left it running over night and in the morning we notice that overload light came up we tried everything to reset that light overload light but still no luck any sugestions please?

[michaeljenner]

I run a 2600 kipor if i overload and the light comes on how do i reset with no reset button, what am i missing here ?

[StainlessL]

Is that the same inverter as clark ig2200?

[rorviknguemo]

I have the exact same generator but mine outputs 280VAC and damages devices connected to it. I measured voltages output from the stator i.e. the 6p connector just like you did and mine outputs 560VAC. I thought it was the stator but you mentioned this model sometimes ouputs 0-1800VAC from it so I’m out of ideas. Any thoughts?

[Frank.Steenkiste]

Love the video, I have the same unit, but I can not get it to run, something is wrong with the ignition, because I don’t get a spark, any ideas?

[marioscicluna]

The problem with my Kipor is that it is randomly giving the Overload Alarm after a few minutes running even if nothing is connected to it. Any idea please?

[anowaruddin]

What is the name of the 12 volt connector? I can't find the connector because I don't know the name ...

[HagaiSalmor]

Hi, I own a KIPOR IG2600.
Brand new, but no spark so it won't turn on.
Any idea how to investigate and fix?

[Дмитрий-тгы]

Greetings. Please make a video about setting up this carburetor, how to set it correctly so that it doesn’t turn off under load and saves fuel in economy mode?

[henrykurt]

where did you order your parts? my inverter module also is fried 🥺

[Дмитрий-тгы]

Did you install the original board, did it work? Is the new board also working?

[bennywetik]

Thank you for the nice video sir, would you be kindly explain why when you try to light up the lamp for second time after fixing bad connector the lamp still not on?

[manishbawra]

Sir eske andar dc dynamo hai ya ac dynamo

[tanleba]

Minh co cai . Bi hong bien tan roi . Co do thay the ko