Honda Small Engine Carburetor Replacement #16100-Z8B-901

This video provides step-by-step instructions for replacing the carburetor on Honda small engines. The most common reason for replacing a carburetor is if it is damaged or clogged, causing the engine to run poorly.

All of the information in this carburetor replacement video is applicable to the following brands: Honda

Tools used: 10mm socket

Model displayed: Honda small engine GCV160LAOMY1R280

Connect With Us!

Don't forget to like and comment on this video, and subscribe to our channel!

[fivehoopers]

this might be the most simple and well done video I've seen in long time.

[tomperkins]

Man, this was GREAT! No long yakking, just right to the point and was exactly what I needed, especially the gaskets.

[cabbys]

This video is so well done and made carburetor replacement my preferred choice over disassembling and cleaning the carburetor. For the small price of an a new carb kit, this is the only way to go. Thank you! And, no need to take it to a repair shop where you have to wait days and pay four times as much.

[freddrake]

You make it look easy. I appreciate the great camera work and good instructions.

[lupiewarrioritaliano]

This video, along with Tim from Jack's Small Engines, made buying the right part, and installing the new part one of the easiest things I've done. In 10 minutes it was removed, installed (true Honda part), and it started in the first pull. The grass is under control!!! Thank you so much.

[leembley]

OMG I looked everywhere for a video or anything that would show me how to reattach the carburetor and automatic throttle piece when I had to put on a new air filter housing. I have a honda HRR216VKA mower. Thank you so much for this video. You made it so simple! It only took me a couple minutes to get my mower up and running.

[roadkillbill]

Great video and instructions! Thank you so much for this. My 10 YO Honda lives to mow another season (or more). Fixed it with a $20 aftermarket carburetor.

[scottmaclean]

Great instructions. Relatively straight forward job, but so helpful to watch it be done first.
One note, I accidentally ended up with the breather tube over the governor rod. This restricted the governor rod and made the engine race. I was able to pull the breather tube off without removing everything and re-reroute it under the rod. A simple tap un-jammed the governor rod and things ran perfectly after that.

[Lankthepast]

Really well made video with clear camera shots and instructions! Helped a lot. Thanks!

[tedmartin]

This video was very helpful. They say a picture's worth a thousand words. I really couldn't have done this repair without this video.

[wisdomtree_btw]

Great video. Exactly what I needed to replace the carburator on my GVC160.

[robertknight]

This was handy. I was only cleaning my carburetor, but this video made reinstallation a breeze.

[chrispeek]

Lifesaver to get carb installed. Thanks!

[FollowThatDale]

Thank you! Only video I could find that matched my carb/choke.

[grpony]

This video was a Godsend!
Thanks.
So much easier to replace the carburetor then to rebuild it.

[wbncb]

even though the carb was slightly different these directions helped a lot. thanks

[reginaldharrison]

Thank you so much did not know how it went back together.

[kyleabel]

Great video, explained things straight forward.

[dougfishback]

Thanks very much. I had a piece oriented the wrong way, and this got me up and running again.

[cheefussmith]

Very helpful. My replacement part and the old carb has this strange little piece that connects just below where he throttle spring is. It has a spring and an flat head but I can’t figure out what it does. Any idea?