How to repair dead wall clocks stop working type Quartz machine

This first we found and fix Quartz Clock Wall very simple
Clock wall stop after work many years. Battery quartz clock good, but clock still stop working.

First
Main problem battery after your quartz clock run many many years
Usually socket / connector battery dirty, and you can clean easy.
Or battery power drop, need replace with new one.

Second
But the other case and how to fix clock wall machine.
Connector power quartz clock machine may be problem too.
How to check socket connector power battery to clock wall.
Clock wall machine made by plastic, and not bolt or nut.
Open cover clock machine, and check below coil.
Usually connector clock power and battery below this cover
Add the battery, and press socket
If work, you can repair socket spring connector from coil and clock battery.

Third
No idea, may be coil or motor mechanic quartz death.
You need replace with new clock machine

Tips before open clock wall machine
1. Dont break anything, plastick cover, plastic gear clock etc
2. Remember any place of gear.
3. Put caution with clockwork component

Please open very carefull. One crack, your watch done.

[timfurry]

Found a small bit of corrosion on the battery contact area on the circuit board. Cleaned it up and the clock works again. THANK YOU for taking the time to post this video, I prefer to fix things rather than replace them. :)

[colinchapman]

THANK YOU! I bought a Thomas Tank Engine clock at auction for my son. The clock did not work when I put the battery in. I followed these instructions and it now works perfectly. Thank you again.

[JerryAndJulieMusic]

Nice straightforward video. I will try this on my clock. Thanks 🙂

[louisprevost]

Hehe, fixed 2 out of 3 clocks with your tutorial. And the 3rd one clearly needs a rebuild of the negative contact because of the intense corrosion I found There. Many thanks for your simple yet concise video!

[noelaruldas]

Thank you very much for the video that shows how to repair the quartz clock moment when it stops functioning.

[xtremeuzilbj]

Amazing tutorial! Fixed my old wall clock really easily 😁

[Rakesh]

Wow, thanks it worked like a charm, wish I had watched this before buying a new one, but it helped the look of the clock, as the one I had was with a pendulum & the new machine did not have the pendulum.

[tautliners]

Great video, my Westclox had the corrosion on the circuit board terminal. Cleaned it with fine Emery paper. Good as new, working perfectly. Quite an easy fix if you take some photos as you go along.👍

[erindellangelo]

omg the second step worked - i fixed a clock! thank you!

[ameenayousuf]

My clock started working after I did all these steps. It took 15mins only!

[renatomorais]

A saved clock because of this, battery tray connector was green, yuck. Thank you!

[mushfiqurrahman]

Thanks for your video. I fixed my clock by watching this video.

[MHG-oupn]

:) Thanks, my clock is running fine again after cleaning those contacts

[tonywong]

My wall clock runs when it is placed on flat surface. As soon as I hang it back up vertically, it stops. I have replaced it with a new battery and it behaves the same. Any advice to trouble-shoot it please?

[reinf_tr]

Why does my clock stop every few minutes, and can only run again by heating the ic part with solder, what's the problem?

[_kanwarrrrr_]

My clock work for 2-3 hours and stop automatically what should I do

[Gurpreetsingh-ckdb]

Sir mare pass old wall clock hai.. Uski machine kharab ho gai hai.. Konse machine new mangwaau.. 3 sueaie wale 45cm x 45cm wall clock hai..

[pralhadsawant]

सिधा घडी करी तो stop ho जाती हैं जमीन लेटा तो सुरू होती हैं

[debarajsahoo]

Hi sir, my wall clock is new and kept 3 years with battery. Now it is not working