1996 Silverado 7.4L Won't Start! Problem Solved (EASY)

[G_S]

Thank you for the simplicity of your explanation. Indeed, you are a genius
I love how well you explain it.

[lgspeical]

you explain it very well, basic and simple. Yot taught me how to crank an automatic by your self ( i never knew that that is very cool))), to check spark, ect. i have a Vortech but unfortunately i have 5 sp. manual, i love it for ice and snow ect., but i need another set of hands and feet to start it. Thank you for bringing me back to basics, if no fuel and no spark then make sure not ign. control module or a sensor blocking signal to ignition coil or a short in ignition wiring is what i am guessing, if all that is good then its the timing chain or something with the timing either chain or distributor. i'm at the part were you are cranking the truck over with the fuse relay panel under the hood, i love this trick thank you for showing this. Lol my name is Lori

[theodoredonato]

Thank you! I have a 96 Siverado 305 with similar problem.

[jorgepena]

Gracias por tu ayuda muy buen video Dios te bendiga

[DAYTONACRACKER]

To thank you so much been trying to figure out my problem for 2 days 🙏🙏

[PIZZAMAN]

Hopefully this will fix my problem as well.. Thanks for your knowledge.

[abdullah_bin_hussain]

First, I wish you all the best in your channel
Secondly, when inquiring about the 1997 GMC 454 Vortec engine, it is difficult to start the car, and the engine is cold or hot, and it does not start until after I press the gas pedal to the other with continuous operation, then it starts, and black smoke appears from the exhaust, then the engine starts to be regular, and yet there is a smell at the exhaust that the fuel does not burn
So I want you to explain to me what the problem is, my friend

[Lifesrad]

I had this changed the ignition control module still didn't go and it ended up being the ignition coil not giving it enough spark to fire it up. Still had spark but it was a weak spark.

[ChrisJohnson-xijp]

Currently dealing with the same issue. Changed the module but still wont run. Has initial spark but nothing after firat lick. Hoping its the coil next

[tonypurser]

I want to do exactly the same thing. Coil fires spark plugs do not help help.

[Nitrousox]

But you pressed the Schrader valve and no fuel came out…was it supposed to?

[MichaelWilliams-mthu]

What device is that you're using to check for spark, and where can I get one?

[ClaudeWhitener-fy]

Update everything I did everything I have no spark

[flawlesswheelsllc]

What’s the name of the part you change