The Last Steering Upgrade I'll Ever Need! IRO Jeep Grand Cherokee Premium Steering Kit Install

Installing the Iron Rock Offroad Premium Steering Upgrade Kit on my 2001 Jeep Grand Cherokee WJ. This bullet proof kit includes everything you need to be the last steering kit you will ever need.

Get 10% off your Yes Welder purchase and using coupon code “muddybeards”

Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout

Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
10% off coupon code: muddy

DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

[vavendano]

honestly i believe the lowering of the trac bar is not to make it straighter, which yes it does help, but in actuality its to compensate for raising the trac bar. It corrects the steering geometry and puts the trac bar and the drag link back in line. great video like always. keep up the good work.

[Sharplife]

nice in-depth details! 👏🏾👏🏾👏🏾 about to give it a go on my wj and when it trail ready then maybe we can link up and go wheeling

[MrPiimpslap]

With the tapered-insert, hammer it home and if any of the insert is showing, grind smooth.

[MacsSpecialitiesMotorsports]

Nice Video and I love the #Ironrockoffroad products! Plus they are from my home state and I love supporting my local businesses! Excited to see you hit the trails with the new setup!!

[Mickale-Moranis]

That mis-alignment spacer on the bottom at the pitman arm looks to be upside down. You want the less diameter side of the spacer to press against the heim and the larger diameter side to be pressing against the surface of the castle nut, since there is no washer. The less diameter against the heim provides the ample room for angularity of the heim.

[danhambrick]

Nice job Robbie.IRO makes some nice stuff.💪👍👍

[charleschapman]

i have the same exact set up on my 1999 Grand Cherokee! Iron Rock everything. Great Video. Would love to hook up with you sometime

[smokeyyy_da_tree]

I just redid the front end an rear end everything was all factory on my 99 4.0

[pion]

Great video, Liked it a lot, but can you tell me what it the part# for that complete kit? I would do the same on my 2000 WJ with 6.5" lift.

[jeffrostenbach]

How about video of steering stabilizer, is it needed does it even help because your connecting the track bat to the drag link ??

[Sharplife]

oh year on the tie rod ends should go with one ton tie rod ends or stay with the hime joints on trail forge steering?

[Vorhizzle]

Ive had the TJ version this on my jeep for a few years and havent really had an issue and its pretty beat to shit from elbe

[wjonthetrail]

Heim joints I will tell you in a few thousand miles you will change your mind about those for a highway vehicle
Ball joints with those parts would be great or even Johnny joints something grease able and quite

I’d say your friends can hear you coming about now

But WJs are great
Only thing I’ve done to mine so far is make some Coustom rock slides and 3.5” lift with BDS coils and Bilstine 5100 shocks
And next will be new front bumper and winch or core link kit

[Kyle-evfk]

What is the professional alignment going to do differently?

[lookforlopez]

This kit better than the trail forged steering system?

[newlion]

I dont see how using the existing track bar upper mount & drilling through thin sheet metal on the passenger side makes this a good solution.

[rudymejia]

Hey man you so I bought the same package from IRO and now that I'm installing it on my 2001 wj the bracket is hitting my oil pan it's about an inch to clear and be completely be in the flange. Got any recommendations to resolve this issue?

[erichughes]

You should only use one tape measure. The reason for this is different tape measures will pull different measurements slightly or if you have a bend in the tip of the tape measure which could throw your measurements slightly off. Nice job Robbie keep up the good work.😎👍

[michaelogrady]

Great job. Would you recommend this project to others? Haven't seen any videos for a long time. Did you take it off-road? How are the on-road manners Thanks

[jasontancock]

Solid kit. Solid vid. Solid beard. Subbed.