HOW TO OPERATE A GENIE / JLG BOOM LIFT - GEARHEADZ

Learn how to operate a boom lift!
This video is designed to help our customers understand the safe operation of a Genie or JLG Boom Lift. The lift in this video is a Genie S-60 (60' boom lift), and the controls are almost identical in the JLG version.

Operating a boom lift requires training and certification. Please consult the manufacturer's manual and undergo proper training. However, here are some general steps to operate a boom lift:

Pre-Operation Inspection:
   - Check for visible damage, leaks, or loose parts.
   - Ensure all safety devices and controls are functional.
   - Verify that the lift's maintenance is up to date.

Personal Protective Equipment (PPE):
   - Wear appropriate PPE, including a hard hat, safety harness, and high-visibility vest.

Load Capacity:
   - Determine the weight and capacity of the boom lift, and ensure you don't exceed it.

Setup:
   - Park the lift on a level surface.
   - Engage the outriggers (if equipped) for stability.
   - Verify the surface can support the weight of the lift and the load.

Power On:
   - Turn the key to the on position (choose ground control or basket control) and release the red safety stop button
   - Hold the engine start toggle switch to one side and allow the engine to crank up
Boom Control:

   - Familiarize yourself with the control panel and the different functions
   - Raise and extend the boom from the ground control to the desired height and position using the right-side joystick
Safe Entry:

   - Enter the platform using the designated access point.
   - Ensure the gate or door is securely closed and latched.
Operation:

   - Use the controls to maneuver the boom lift.
   - Move slowly and steadily, avoiding sudden movements.
   - Communicate with a spotter on the ground for guidance
Safety Measures:

   - Keep your entire body inside the platform at all times.
   - Do not lean or reach too far outside the platform.
   - Be aware of overhead obstacles and power lines.
   - Follow all safety protocols and guidelines
Shutdown:

   - Lower the boom and platform to the ground.
   - Power off the lift according to the manufacturer's instructions.
Exit Safely:

   - Exit the platform through the designated access point.
   - Ensure the gate or door is securely closed and latched.
Post-Operation:

   - Perform a post-operation inspection for any damage or issues.
   - Report any problems to maintenance or your supervisor.

Remember, this is a basic outline, and specific boom lifts may have unique features and controls. Always follow the manufacturer's instructions and complete any required training and certification for safe operation.

VISIT OUR SITE: WWW.GEARHEADZUS.COM

Gearheadz Equipment is located in Pendleton, SC. We sell Reach Forklifts, Telehandlers, Boom lifts, Articulating Boom Lifts, Skid Steers, and Mini Excavators. We carry brands such as: Genie, Terex, JLG, Snorkel, Skytrak, Bobcat, John Deere, Gehl, and more.

[christopherbeattie]

Needed a refresher course not infront of the boys at work. Thanks for the video brother. Much appreciated

[MrCaribe]

3 years out, and still helping people. 👍🏻

[mannyaulakh]

I'm an accountant but there are people next to our building using this thing and I've been wondering how it operates. Thanks for this!

[leonelvasquez]

This is professional instructor, clear and easy to explain, obviously the harness optional everybody knows, thanks !

[HollywoodHome]

great tutorial, quick and painless, certified in 6 minutes!

[tonz]

Great vid. Helped me refresh after a year of not using one.

[KennCastillo-ft]

Thanks for this, brother. Been needing this to freshen up again

[Bearcoveragegaming]

This is a great video I was at work one time it took 6 guys to figure out why the machine wouldn’t let us drive it’s cause the basket was on the wrong side lmao 😂

[MrMojabo]

I use to paint 747, dc10s, dc9, s ... anyway airplanes in these, not unusual to spray a dc9 by myself, driving and spraying at the same time. Would take a jgl 62 footer behind the tail of 747 up all the way and boom up all the climb the basket and start on the top of the tail. Used 80 footers to change the light bulbs in the ceiling of the hangers.
This was in the 90s. Fun to watch these videos

[jimmyoalfaro]

Thank you for this video! Getting ready for my practical test for my aerial lift permit😃

[TacoStacks]

This was awesome I was looking to buying one of these

[leonelmolina]

Im a new bee going to start working on frac work & on manlifts , this video help me alot brother thank you, from the valley 👍

[ColdComrade]

I feel confident to teach the lead tech toady, he seems insecure about operating this lift and is late to the job site. This video is a lifesaver

[alexanderlarios]

I gotta so some painting work tomorrow so i needed some refreshing since last time i operated this

[googleprob]

Great tutorial very good explaining on how to drive the only thing you forgot is to use your harness safety belt before entering the boom lift basket other than that nice well explain video tutorial

[Sobervnes]

I’m guiñan be using these in about 2 weeks thanks for the video! 🙏🏻

[fredsmids]

I was hoping to find out what the top left (ground controls) toggle was for. The picture looks similar to the turtle / rabbit toggle.

[FreeStyleIceSkater]

Hi sir, I past my course a few days ago, I'm a scaffolder so I'm not scared of heights but.. On the cherry picker I have to use for me job does make me abit shakey because I'm not used to the floor below me moving 😂, my question is can one of these tip if there is no weight on them apart from me if fully extended?

[chrisgasparre]

Is there a process for proper stabilization since there are no put riggers

[scottsenjo]

Excellent video. Thought I'd trim a tall tree in my backyard (large, dying limb hanging directly over my house) instead of paying tree cutting service.