Stop Rust Permanently! - Jay Leno's Garage

Get rid of your rust with amazing products from POR-15.

THE BEST OF JAY LENO'S GARAGE

JAY LENO'S GARAGE ON SOCIAL

ABOUT JAY LENO'S GARAGE

NBC ON SOCIAL:

Stop Rust Permanently! - Jay Leno's Garage

Jay Leno's Garage

[johnd]

Nice to see that Jay takes his time to help these small companies with promotion of their American made products. This is why Jay is successful. He never forgot where he come from, and has a passion for what he does. Thanks Jay

[MrKeyboardCommando]

There is a twofold process which will permanently stop rust.
1) Use aluminium.
2) Move to Arizona.

[mschnur]

FANTASTIC stuff, I've been using it for years, and just yesterday on my Dodge. Accept no substitute, because there is none. But one word of caution: Use nitrile gloves, available cheap at Harbor Freight and elsewhere. Because POR 15 is impervious to all solvents, if it dries on your hands, the ONLY thing that will take it off is TIME. When resealing the can, put a sheet of plastic food wrap between the can and the lid, then tap it down because if the product dries the two together, you'll destroy the can getting the lid off the next time.

[Dr.TJ_Eckleburg]

I've used this stuff on my 1995 Mercedes which was developing a small rust spot near one of the rear wheel wells. I followed the instructions and the stuff worked great. Dries rock-hard too. I put a spot of touch-up paint over the repair and it's virtually impossible to see unless you're really looking closely. After about two years no sign of the rust returning at all.

[RAYGC]

I had a rusty railing on my house so I knocked off the loose rust with a wire brush then painted with POR15, finally painted with black paint. It's been 5 years and it still looks great and I'm in the NE not in SolCal, it snows here. Stuff works great, just a little expensive but worth it

[mikegigabyte]

paint over rust?
or paint over rust thats been sanded, degreased and prepped first :)

[carbitner]

I've used their products, and it does end up "flaking" off like other sealant products as Jay mentioned. I fully prepped per instructions.

[hjr]

This is the best stuff I have ever used. If properly applied and protected, it will never rust again unless the metal is bent.

[theTank]

I used POR 15 when I was in Auto Body back in high school. This stuff works amazingly. My teacher deminstrated how good it is buy taking a piece of cloth and coating it with POR15 and the next day we could drill and tap into that piece of cloth. this stuff is awesome

[MCTeck]

I  first used this product 22 yrs ago to repair rusty water cooling towers. A word of Warning! DO NOT get any on your skin! If you do, wipe off immediately! I got some of the silver product on my forearm, and the moisture on my skin  caused it to  cure. The only way I got it off, was to scrape it off  and it took a lot skin with it!  Read and follow instructions. If you top coat with paint, apply paint while product is "tacky" or It will dry hard and paint will not adhere. Then you will have to sand. A great product!

[Crushercurtis]

Stuff definitely works.  Did my TJ frame like 4 years ago.  Not a lick of rust after 4 Chicago winters.

[Clearanceman]

Permanent is a big word when you're talking about rust.

[bernardob]

I have used this product for years....works fantastic!

[Nessal]

I have used this and Rust Bullet and the latter is a much better product. The POR products require a lot of preparation prior to the coating. You can apply Rust Bullet directly with minimal prep. I have panels that were rusty with Rust Bullet painted over for the last 14 years outdoors rain or shine and no issues!

[jamesmcgall]

Used the gas tank liner and it worked very well. Did not use any prep materials just stuff I had at my house. Make sure to be patient and let it cure fully.

[Grendelbc]

Been using por15 for years. I don't follow all the steps. Wirebrush and sandpaper loose rust then quick scrub with a brillo pad. Wipe down with wet cloth or rinse thoroughly. Let dry then use a couple coats of permatex rust treatment. Let dry and add a couple coats of por15. Haven't had any trouble with por15 sticking to treated areas. Follow up with top coat of rustoleum. Has worked very well for me with no problems.

[ryoamora]

Great product, even though, a little pricey...Well worth it, applied to some rust spots on the door of my Datsun 280zx. Not only has the rust never returned, but the repair is undetectable. Awesome stuff.

[laverdadesmejor]

3:04 Re: plastic bed line - I've had one in my '08 F250 since new and the bed still looks factory fresh.
And it's been loaded with just about everything!

[PeaceBong]

I recently replaced my fuel tank/pump assembly but I would like to try this stuff to repair my old tank. Thanks Jay!

[GasserGlass]

Por-15 tank sealer is some good when I make a custom fiberglass gas tank for a custom car, truck, boat, plane or motorcycle, I use POR-15 tank Just be sure to let it sit in a warm place so it can We've had ZERO issues so far using POR-15.

 If you cant find POR-15 and you need something right away to seal or re-line the inside of a repaired, rusty or new fiberglass tank, you can buy another GREAT product called RED KOTE ....You use it the same way as 100 uses for this stuff!