Hubble camera failed reset

Показать описание

Angela Swailes

Рекомендации по теме

Комментарии

What sometimes works for us on like the 10th attempt is the repairing option of turning both camera and parent model off, waiting 30 seconds then turning both back on. No holding of the pair button or anything. It never works first try but after a lot of tries and taking some breaks it did eventually work.

stefrojas

I’m on the second one. Mine doesn’t even beep like that after being left unplugged for a long while.
Also, I think you were supposed to let it go after the beep and then just watch for it to start blinking minutes later.

carsbykev

Having the same issue if you’ve managed to fix it anyhow please let us know😢

cuneytkucukoren

FWIW my wife and I learned it was a physical hardware issue. Took it back to the store we bought it from, they called Omicron to walk through the troubleshooting steps again to confirm the issue then provided a replacement camera. Apparently it's fairly common. If this has been driving you mad and you've done all the reset and repair steps to no avail, it's not you. It's the device is faulty. Get it replaced. Good luck.

horusofoz

Came back from a family vacation and our Nursery Pal Crib camera was acting the same. Spent half a day trying anything i can find online but no dice. Guess this will end up in the garbage :(

vietkevi

Having the same issue with our camera. Did you get it figured out?

benwiertzema

Followed along with my camera because I can’t get it connected again either and mine won’t even beep

sydneymacquarrie

Completely pulled apart the one gen before the one your working with and only paired once, had a breaker shut off manually by myself, then turned into a day long event trying to re-pair it to the device. The device wanted to pair happily. The camera not so at all, took the camera apart with basic knowledge on tech and found no connection between the motherboard and the pair button 😂😭 so what it seems like you guys went through was a fail switch to not activate or just a beep holding the button because my own device wouldn't even if I tried an hour. The buttons connected to NOTHING! 180$ DOWN THE DRAIN AT WALMART. smh. I'm sorry for you guys take it apart and see what it's connected to. May just be something that beeps and nothing the motherboard to make commands

damianstratton

My partner and I are on our 4th camera. Same issue every time. Seems to be after the power goes out and then comes back on, the camera never pairs, and cannot be reset.

Ladellis