2013 - 2017 Honda Accord Strut Mount or Strut Replacement, front end noise

Detail video of how to remove and replace a 2013, 2014, 2015, 2016 & 2017 Honda Accord Strut Mount or Strut Replacement. Front end noise, passenger right side noise or driver left side noise. Rattling sound in front of 2013 - 2017 Honda Accord Strut Mount or Strut Replacement, front end noise

[martinsearchinternational]

So, did the clanking disappear; would you do a follow up video, car ride to demonstrate a lack of clanking, maybe a before and after. Normally, we as an audience try to diagnose things by hearing, seeing, or touching and that would be a great closure-follow up video to this one. Many thanks for considering it.

[ChukwuOhagu]

I'm changing my by morning. Thank you so much. This video was enlightening

[AlexisHernandez-egoq]

Explain everything very well 👍 more vids like this

[nunezhgo]

thanks the best video so far even though you didn't change the strut but is exactly the same thing lol 😂

[angellugo]

thank you for this post, my dude. very helpful. 💯

[luispagan]

How did you get the bolt for the strut mount not to spin?

[libertyforall]

Nice vedio but putting a vice grip on the strut pole is a very bad idea, if you as much as scratch the pole it will cause the seal to leak and secondly, if the strut pole is sliding down inside you pushing up you have a damaged strut. Quick tip. A bent strut pole will damage the mount.

[theripper]

You make me a little nervous sliding your feet under the car when you only have it up with a floor jack. Never get any of your body bits under a car if it's only supported by a jack and not jack stands...

[caudao]

What’s the tool used to pop the tie rod end out?

[Slowcr.]

is it difficult to pop the cv axle back in?

[ahmadbudianto]

Yang sebelah kiri bagaimana cara bukanya, apa sama seperti sebelah kanan Mr mekanik

[careful]

To do this job properly you have to take the lower ball joint out and separate it from the knuckle and take the axle out of the knuckle. Remove the knuckle from the strut and the strut will come right out . This is not a job you should do on the street. You see he doesn’t show how he got the strut and knuckle lined back up. It was probably him and two other people.😂😂😂

[senataheri]

Don't touch shock shaft with pliers

[markh.]

Hope you bleed the brakes after doing this. Because taking the banjo boat off. You let a lot of air in the system.