How to reprogram your tire sensors! - no more tire light -

In todays video we go over the super easy and cheap way that I reprogram my tire sensors!

[jeremydigiammarino]

Couple of tricks for you and your users. You dont need that tool to calibrate tire location but it does make it a little easier. First go to each calling tire and remove air pressure until horn beeps ( yes you will have to come back and add the air back in but it will recognize this way without scan tool.) Also if you turn off your lights before you start your turn signal will come on solid to indicate which tire needs calibrated just follow the light to the coordinating tire and lastly if you have a different display in your chevy vehicle no worries just incert your key turn it to the on position and then hold the lock and unlock button at the same time until horn beeps and you will then be in tire pressure calibration mode so you can begin from there hope this helps everyone!

[kyle_tyler]

i already know how to do it i’m just watching because i watch all your videos 🤣

[fbodyman]

This device work so easily! Thanks for the video.

[maxum]

Man you make that look so easy. I have that same tool and have tried every angle, front, back sidewall of tire, at the tip of the valve stem, base of the valve stem, everywhere. I can not get it to work. I know the sensors aren't bad because the truck is reading the air pressure of each one plus it's a 2021 truck so they're new. I took the oem sensors out of the oem wheels and installed them in the aftermarket wheels so they are the original sensors. My wheels aren't even that big, 20x10 with 295/65-20 tires. Just can not get them to relearn.

[misaeljr.garcia]

Came on youtube to look up how to reset my new tires and this first video that i saw was this one! thanks man!

[klw]

I just bought a 2022 GV70 with factory 19 inch wheels. Swapping them for 21 inch aftermarket rims. Definitely going to buy this device. Unsure if it will be as easy as holding the check down on your truck when it's on the tire pressure screen on the dash... But we shall see!! 🤞🏽🙏🏽 Wish me luck. This video is awesome!

[dukesairgunpestcontol]

Video was very helpful. Mine are 15 inches wide I just gave up on the tool for my truck. Still used it for other vehicles, but resetting the sensors from the back worked. Perfect thank you.

[cristobaldelacruz]

Just did it a few minutes ago, and guess what it worked awesome piece of tool. Thanks for the information very helpful.

[xXwheezyownzXx]

From my experience with this I had to use the device from the backside. My sensors were installed on the inside valve stem on the fuel wheels on my 2017 silverado. Amazing little tool and saves a ton of money.

[CantSpelGood]

Just wanted to drop a comment about this. I got a 2019 Chevy Silverado and the removing or adding air pressure trick didn't work on mine. But using that little scanner worked like a charm and took no time at all to scan all four tires and get the TPMS readings back.

[jimm]

Thank you! Holding down the check button is the key and you showed me that👍

[rednecklivenikkilynnphilli]

If you have wide wheels you can also goget it threw the tread closer to the valve , certified tire teck here

[MattyiCeGames]

The truck looks so good like that, keep that look

[JR-srqj]

Sweet! Thanks I have a 17 Silverado slammed to the ground & I’m always changing wheels but I make sure they have sensors this will help with that annoying light.

[OBSChris]

First i gotta say i love your videos and i know this is an old video but i like how you help others out by making these types of videos because this is something that i do at work with an oil change when a customer needs a tire rotation and it will save you a lot of money in the long run because our oil changes aren’t to expensive but it’s cheaper to do things like this yourself if you wanna save some money.

[gbrewer]

just got this in today for my 2014 gmc sierra 22x12, 33 12.50s. but i got the one that is 2in1 which is GM & Ford and it worked perfectly! less than 5 mins to reprogram all 4 sensors.

[metalhead]

THANK YOU, i read my manual and it said to do this but i didn't know what it meant when they referred to the tool, like obviously it didn't come with the truck and they always do this for you at the shop so when you do your own tire swaps i guess you need one of these. Price is double in Canada unfortunately but better than driving to the dealership/shop for something so easy

[bdtaylor]

I got the same tire sensor programmer and I found it works better if you put it right against the valve stem cap.

[kyle_tyler]

if you dont have the tool or you’re having trouble with wide wheels, you can go to the tire learning mode and just let some air out from the stem, it will beep when it senses the tpms.

[zrod]

You saved me a lot of headache and cash!