How good is it? 'WT32-SC01 Plus' with ESP32-S3!

I don't think the difference between ESP32 and ESP32-S3 is huge. So if you need to use a lot of GPIO, choose S3, otherwise use ESP32. In this video, I focused on speed testing according to the display connection method. Hopefully, this helps your project.

Product: WT32-SC01 Plus(ZX3D50CE02S)
ESP32 module: WT32-S3-WROVER-N8R2
LCD module: ZX3D50C4832I
Display Driver: ST7796UI
Touch IC: FT6336U
USB-C Interface
RS485 Interface
Speaker Interface
Debug Interface
Extended IO Interface
SD Card

*Timestamps
0:00 - WT32-SC01 Plus
0:53 - Display Test (WT32-SC01)
1:17 - SC01 vs. SC01 Plus using LovyanGFX
2:36 - ArduinoGFX vs. LovyanGFX (WT32-SC01 Plus)
3:03 - LVGL Test: Animation Effect
3:59 - LVGL Test: LV Demo Benchmark

[LVGL SquareLine - Tesla Website]

[LovyanGFX settings for LVGL]

[Your choice for 3.5inch display? - LilyPi, WT32-SC01, MakerFabs' ESP32S2, Lolin32+ILI9488 -]

[WT32-SC01 Plus]

#ESP323S #SC01Plus #ZX3D50CE02S #ThatProject

[jpindter]

As always, excellent content. Thanks a lot for your efforts. Greetings from Mexico!

[deanstarman]

I'm going to use it for my next project. Thanks.

[srssxdq]

As always, excellent content. Thanks a lot for your efforts. keep going on..

[idiedlastmonth]

I found it useful! Thank you very much!

[masterjavier]

I love your videos they are great.
Do you know if there is an amoled screen with touch for projects, I have searched for a long time and I only found one from "lilygo" but it is very small and does not have a capacitive touch screen, do you know any?
thanks

[pllagunos]

Thanks for the detailed video! I am looking for a 5" display that I can program with SquareLineStudio but also have it communicate with a SPI peripherals (a thermocouple sensor), do you have any recommendations?

[ki]

Hi! Thanks for the video, i just got one SC01 plus, but it freezes randomly with the factory demo. The runtime gets shorter every time from 5-6 min down to 1 sec. I tried different power sources (PCs, 30W usb charger, power bank, etc.) but no luck, still freezing. Sometimes it can't even reset with button. Did you encountered similar behaviour?

[codewithdaniel-]

Could you please speeds for compare a 16bit parallel with 8bit parallel

[joshgilbert]

Thanks for posting. I looked on your Github and couldn't find the sample code for the WT32-SC01 Plus.. I just got one and would love to start tinkering around with your sample code.

[whatcall]

Thanks for your great intro video. Do you know any way to use LVGL Micropython binding with SC01 plus parallel ineterface. I cannot find any support to the ST7796UI.

[ivanz]

How did you upload the code there? I bought this screen, also adapter for debug, than used PlatformIO with demo sketch.. even observed serial messages from this board, compiled without errors. But when press Upload, following error occurs "Error: esp_usb_jtag: could not find or open device! ** OpenOCD init failed **"... Questions: 1) Which software to use for normal downloading there? 2) Is there any software which can provide graphical interface (like Squareline) and upload function at the same time? Thx

[JarrodM]

Have you been able to get the eSPI library working with SC01 and SC01+? I get the screen working on the SC01 but the touch is not working.

[annoorkhan]

Hi, thanks for your video.but I need to backup the default farmware before I start r&d .do you have any idea how to do that?

[SaverioPieri]

Hi, I bought this display and configured it in platformio as esp32-s3-devkitc-1-n16r8v, but I really dont know if it's correct. Someone say there is 2M PSRAM, someone else 8M. Can you suggest a right platformio config?

[kingwildcats]

What's the best way of telling if your USB is made for programming or just charging?

[prashkd]

This is excellent.
I have a few old Arduion Uno ILI9488 displays designed for ARduino Uno which uses 8 bit parallel interface. I also have some spare ESP32-S2 saola boads and I am looking to make HMI's out of them and use LVGL library for easy GUI designing. Can you please let us know what driver libraries (TFT_eSPI or something else) should I use and how to configure them for parallel interface.

[elabinnovations]

hi sir
Where did you buy these displays?
Can you suggest cheap colour displays for projects?

[rhianjustin]

Have you had the micro SD working in this board? I’ve tried so many times but can’t get it to communicate, I’ve used SD.h with SPI.h and SD_MMC.h, declaring new pins, but still doesn’t work. Do you have a video of a project that utilises the SD?

[aluminito]

Excelente, la nueva placa tiene una mejora sustancial en velocidad, el siguiente salto tiene que ser un nuevo chip ESP32 que tenga mas velocidad y menor consumo, para lograr mejor fluidez en la interface grafica y menor gasto energetico.

[rarenu]

Hi thank you so much for the comparison video of WT32_SC01 with its Plus version. Today I received the WT32-SC01 Plus with inbuilt demo program. Please suggest me a demo sketch to test my WT32-SC01 Plus, by myself. Thank you.