Modify your Post Processor for On Machine Probing in NX 9

On machine probing is a measurement technique used on machine tools to use while your part is still in process on the machine.
The machine uses a 2D or 3D probe similar to those found on some CMM's. The end of the probe sensor that comes into contact with the part is made of hard non-marring material for metals such as a ruby.
The probe contacts the part and records the machine position when the probe sensor is triggered. Probe positions are recorded on the controller, and the probe point positions may be processed directly after the points are taken or later to obtain meaningful data from the points. The meaningful data can then be relayed to the operator, quality system, or back for adaptive part processing. Machine tool probes may be obtained through Renishaw or other manufacturers.

This video shows how to modify a post for on machine probing in NX9