How To Wire LED Turn Signal + DRL Strip *Install On Car Headlights* (LEADTOPS)

Thanks so much for watching! I hope you found what you were looking for, and if you have any additional questions, leave a comment down below and I will do my best to answer you! To support my channel, Subscribe and Turn On Post Notifications so you never miss a new video!

[BiShoP]

My brother, you broke this shit down exactly how I needed to see it.
You saved me hundreds of$$$$
The frustration I had trying to figure this out is now gone.
Thank you

[simbanugz]

It's crazy I can pull a motor apart and rebuild with easy on my mustang. But zero knowledge on lighting. I like the advice with silicone. I'm going to be opening my headlamp assembly on my 12 mustang and add a strip towards the bottom. Thanks for video

[tdanna]

You explained alot of the questions I was having along the way with other videos. Great stuff in explaining what's going on.

[seanelgie]

Best explanation I’ve seen yet thanks so much brother!

[finesse]

Litteraly one the best ones yet on these LED sequential set ups ...good vid bro

[smallsxoxo]

I was convinced that having them at the bottom of the headlight was cooler but you've convinced me to have them up there since we have the same headlight shape 😮

[josh-]

Thanks for this video. This is by far the best tutorial on how to install these drl on YouTube .
Much appreciated 👌🏼

[krystian]

Hey, thanks for helping people sort out this stuff even after six months

[Gabasto]

best video i seen on this, u can clearly see what ur doing unlike the other videos

[TeeFat]

Thank you for the video. Here's a small tip: the pins at the end of the wires are supposed to be pushed into the appropriate holes in the back of the headlight connector. In that case, you won't need the wire-tapping clips.

[TheMasterSwingtrader]

Do the led strips turn off when turning on low beam (so therefore when drl turns off)?

[Kira-xvte]

Thanks man for this tutorial. I just bought mines today and I was struggling to find which wires to connect and now I know how.

[nstyRICK]

thank you, good video, greetings from Czech Republic

[pnrking]

Thanks alot your explanation were so complete and joyful to learn
Wish youbeternal success and God Bless
Thanks for sharing with us❤❤

[ssnaziriful]

Ace video👌🏽highly appreciated will be doing this tomorrow, top man!

[sivuyilekamjoli]

Awesome video. does the turn signal work if there is no key in the ignition ?

[djlakota]

Excellent video, well explained too....👌🏽

[firehanshg]

so you put the small balck wire in the Negative black wire at the back, The yellow wire goes two where you sais you found the 12 volt is that the top second or third slots from the top, my question is where did you put the RED WIRE, YOU MOVED TO FAST, could not get a properly look at that. any help would be appreciated. cheers Hans in the UK.

[firehanshg]

its a shame to did not do a slow full close d up how you tapped al 3 3wires on the back of the headllightes sockets. cheers Hans.

[Sher_hayat_x]

dude awesome job man. Love from England 🎉