How to Make a Simple Duplicate Key 🔑

I show how to make a simple duplicate key that can be made from a plastic card, a tin can or any other similar material. This can be used as an emergency spare key. The first step is to use a lighter and clear tape to make an outline of the key with the exact dimensions of the original. The outline of the key is on the clear tape which can be transferred to a plastic card or the lid of a tin can. The key is then cut out as precise as possible and can be used to open the lock. It may be too flimsy to turn so you can use a small flathead screwdriver or a lockpicking tension wrench to turn the key.

If you enjoy the channel, please support Von Malegowski:

Lock Picking Tools:

Connect With Me:

On stiffer plastic, you may have to bend the key to make it fit into the keyway better. It is very easy to make a duplicate key this way and can be done in a few minutes. Be careful to make the teeth of the key as accurate as possible so it does not get stuck in the keyway.

More Lockpicking Videos:

Lockpicking is the art of unlocking a lock by analyzing and manipulating the components of the lock device without the original key. In addition, ideal lock picking should not damage the lock itself, allowing it to be rekeyed for later use, which is especially important with antique locks that would be impossible to replace if destructive entry methods were used. Although lock picking can be associated with criminal intent, it is an essential skill for a locksmith and is often pursued by law-abiding citizens as a useful skill to learn or simply a hobby. The move towards combination locks for high-security items such as safes was intended to remove the weakest part of the lock: its keyhole.

Music: YouTube Audio Library
Tracks: Dark_Red_Wine, Dont_Change_A_Thing, EDM_Detection_Mode
Artists: Silent Partner; Kevin MacLeod; Audionautix

©Von Malegowski. All Rights Reserved.

[regularcookie]

Ez
1: need a lighter
2:Need a comb
3: Now Light the comb until it melts to make a molten plastic
4: Find a Powder any
5: find a tooth paste
6: Mix the the tooth paste and the powder to make a wad of putty
7: find a key
8:Mold the key on to your putty
9:return the key that you stole
10: Now Grab your Key mold and molten plastic to make a plastic Note: Make the molten plastic dry first
11:Enjoy

[Footress]

hallo kaka youtuber saya tetap datang mendukung kaka semoga kedepannya dengan menyuguhkan konten yang lebih menarik lain nya amin

[AmandaPanda]

More like.." how to get a plastic key stuck in a lock"...

[drferryporsche]

yeeeaaahhhh I think I’m just gonna go to the kiosk

[worldsgonemad]

Won't it change the dimensions of the shoulder to make the bow bend after the things is cut?

[bolti]

Great video but the music drove me crazy!

[anticom]

I tried something similar once, except I used an aluminum can to make the key.

It did not work.

[MistyWoman]

How about a two sided car key that doesn't lay completely flat to catch both sides?

[Jkur]

I’m just gonna take it to the hardware store and let them make me an actual key.

[mvp]

I need duplicate keys there are no shops near and i dont thing this will for rather it would be a bog trouble once plastic breaks into the lock

[christiemosley]

This a key that already work. I need to make one to one I lost key to🤦🏾‍♀️

[vivdrem]

Im gonna use cardboard but it qould be easier to just use tracing paper and trace the key

[ADAM]

Next video
"How to commit tax fraud, the easy way!"

[Copperzkey]

thanks i now know how to get into my neighbors house! thanks
(*>*)

[cminneapolis]

You don't explain what you are doing from 3:49 to 4:09. ???

[astroid]

Great idea do u think shrink film would work?

[sam-lxkw]

What if the key has a plastic top isn’t it gonna melt when u light it up

[daddyshrill]

I came hear cuz I lost my keys my dad want to beat my ass up and im going to use my mom keys to duplicate

[mrss]

Good video. Please lose the music it’s very distracting.

[ebolele]

why the fuck did i write subtitles for this