Corian Ramp Sink Video - Solid Surface Seamless Sink

preview_player
Показать описание
Corian Ramp Sink - This is a quick overview of a Corian Ramp sink. I'll show you the top details as well as how the drain is attached to the underside of the sink.

A drain must be removable to access any glogs. It also needs to attach to a regular drain pipe. Without access to the top side of the drain assembly, a specially designed drain attachment is required.
______________

This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.

1️⃣ POWER TOOLS

2️⃣ FABRICATION TOOLS

3️⃣ CNC ROUTER TOOLS

4️⃣ SANDING AND POLISHING SUPPLIES

5️⃣ MISC

6️⃣ COUNTERTOP CARE & CLEANING SUPPLIES

____________________________

QUESTION — Have a question about Countertops, Fabrication or Anything Else? Post in the comments section of this video!

#olivemill #rampsink #slotdrain #coriancountertops #solidsurfacecountertops #avonite #staron #wilsonart #himacs #krion #livingstone #stonia #fabrication #dupontcorian #diycountertop #kitchencountertops #avonite

Disclaimer: Wear safety equipment at all times. At times we remove safety equipment for the sake of filming. These videos are for entertainment and as such any process you follow is done at your own risk.
Рекомендации по теме
Комментарии
Автор

Thanks for watching. If you have any ideas or questions please comment. Let me know if you have any ideas for future videos.

AndyGraves
Автор

Your videos are really helping a lots, thank you so much.

khalifahabdulkadiri
Автор

Nice video very Helpful 👍 Thank you (From India)

royalgraniteandinteriors
Автор

Thank you for the videos! Super helpful and informative. How do you do the skirting for the countertop? Any chance you could make a video on that?

CyrusBee
Автор

Can you explain the fastening of the screws? I've heard helicoil's are one way to fasten screws to solid surface

HatefulBread
Автор

Hi Andy ! Thanks for all your videos ! how would you make an almost flat circular slope on a panel that brings water into a centered hole? a slope machined in the thickness of the top to make an almost flat washbasin? This would make a very clean washbasin for a minimalist seamless design ! Hope you understand what I mean. Bye !

alexandrebisi
Автор

Good work sir I m Korean corpentar and Qatar working

rajsahani
Автор

How would you make a kitchen countertop which is supposed to be 20mm thick in the front out of 12mm corian? Would you make 45degrees joint in the front of it or glue two 12mm pieces together and use router to plan it to 20mm?

ukaszprzedwo
Автор

Can you share the brass insets used to attach the pan. Don’t see the link in the comments.

ryanmiller
Автор

How do you install to the wall with out a bottom cabinet?

joseggarcia
Автор

hi, Do you epoxy all the flat parts together, right? So it is not, strictly speaking 'seamless', is it? :)

IgnatFi
Автор

How to clean the gap if there’s hair or anything gets stuck in there

Momo-kqhd
Автор

Roughly what dimensions did you use for the sink bowl depth in the front and back walls?

HannahLau
Автор

Andy, how wide is the slot at the bottom of the sink?

lamehomemaker
Автор

Does the water drain slowly since there is no overflow hole?

miamia
Автор

How do you figure out the slope of the ramp?😮

hms
Автор

Hi! Would it possible for make and ship it to
New Jersey?

arahmed
Автор

Hi colleague! is there a project for this sink in solidworks

АнтонГлухарев-вю
Автор

How does one fill such a sink? IE plug it?

ptolemyauletesxii
Автор

Andy what product number is that? I like the color

paul