HOW TO BUILD A QUADCOPTER | AllCarbonRC Coyote | Part 1

I'll show you how to build the AllCarbonRC Coyote Racing Quadcopter. Of course, you could just buy the copter ready-to-fly, already assembled from AllCarbonRC. But if you want to build it yourself, here's how.

[pierretharreau]

I love this, this is actually so good,
just the hints of humour, sparkles of knowledge, as well as the content
SO MUCH GOOD CONTENT
You are genuinely the best quad copter channel on you tube, You answer all the questions, and seem to know everything
Keep it up
Ur da best

[ponyboyfpv]

Good to see that you have finally learned how to properly use through holes.

[usdskr]

I did the same thing with the rrosd, except it was for the alien pdb. I love how that pdb is so easy to solder up each esc rather than going directly to the rrosd.

[babakzekibi]

Hey, thanks for introducing me Project Blue Falcon. Lovely video as always.

[tygasdeath]

Your an extraordinary individual with a remarkable skill set I hope to have like 25% of your knowledge one day lol

[FunkFPV]

I had the same problem soldering to those ESCs. I think they have some kind of waterproof coating on them?

Also DYS XM30 ESCs are the ones you can't reverse in BL

[PIXscotland]

Your soldering, while not technically perfect (Who's is?) is far better than most builders I've watched.

Soon to be building my own 250 as a first build and I will document that too.
Hopefully I don't screw up too often.

Thanks for the excellent videos.

[BrokenPropCrew]

Nice camera work and editing! Those tight soldering shots are so hard to get. Love the little tips and hints strewn throughout the video. Thanks for including the silly bits, too! =)

[Bludz]

The TBS esc's have a waterproof coating on them. For some reason they coat all the pads too. Makes them very difficult to solder and in crashes I've had solder joints break. I personally think you are awesome at soldering :)

[maxxkax]

nice thing to do with motor wires are to braid them. then if you move them to another build and need longer wires you can undo it and get longer wires. or if you burn one ESC you can just cut it of and still have lots of wire left.

[wikananantabrata]

I think the waterproof coating in ESC that makes it more hard to solder it. (I have that ESC too)

[edgar]

Why did you select this frame and this kit? Maybe you explain this somewhere later but I would have expected that you mention it at the beginning of your video.It's interesting what you said about the F40 Motors and that you like it. I just saw Mr. Steel introducing "his" motors in a video and it seems he has the exact opposite opinion about the "clicks"...

[die_hertz]

This clicky feeling of F40-II surprised me at first. Nothing like it with my F60, maybe that's due to stronger magnets.

[NulliFieDFPV]

Hi Joshua, I am almost new in soldering. Never heard about this "... Flux ...". May you tell me, what name it has and whats its benefits? Tank you!

[SKIDOOSH]

Joshu I am an aid fan and follow all your vids, , , Since you always shoot it straight with us I am going to do the same, Not one of your better builds my friend. Those ESC wires in the air are going to be susceptible to prop strikes, branch snags and frankly look ...sloppy..maybe the RR osd on top OR it would have been a great build for the new Runcam swift 2 with integrated OSD. As far as the soldering...did it stick? Not shorted? Did it fly? Then great job :)

[michaelcooke]

Hi Joshua, great vid as usual. One question, why did you decide to put the OSD under the FC? I think my instinct would have been to put it on top so that the ESC wires were flush against the frame. Anyway, keep up the great work!

[bigpops]

Is this the mistake: You didn't solder up the VTX and camera leads to the RROSD before doing the ESCs?

[crezzlin]

like the build, them TBS escs look like Kiss? I see you forgot to solder pins on the RROSD for video in/out :)

[xiiivaniix]

DO you recommend just getting the NEW FPV vision elite bundle? much different than the one you reviewed. still no Blackbox ( which i don't use ) and no F4 but it has current sensor beeper literally everything. and if i want blackbox it has a UART specifically for that. i hope to hear from you iv been going back and forth between brain FPV the ELITE and the Omnibus f4 pro on a chameleon build

[wescrock]

Hey Joshua! What's your long term opinion of the Coyote Stretch? All Carbon RC is going out of business so I picked one up with three replacement arms for 40% off. This is replacing my SpaceOne Formula 220x frame. Would love your thoughts