POWERPLAY P16-I ULTRANET Interface for P16 Personal Monitoring System

Want to add Personal Monitoring to your PA system? Check out the P16-I, the interface for our P16 Personal Monitoring System. With the P16-I, you can connect 16 inputs via analog or ADAT and convert to ULTRANET for use with P16-M Personal Mixers.

[nataroonytrontime]

Also realy good for recording as if you have an analog mixing console and you want to digitally upload it to your computer.

[ollitrop]

Question: Can I connect via ADAT from the s32 to the P16i and then run from the P16i to my P16M's for in-ear? Please explain the routing since ADAT's outs are 17-24 and 25-32 but Ultranet's are 33-40 and 41-48.

[WillyFranklinOnBass]

Can you plug an Ultranet Output from a XR18 Into the front panel of this and use it as a distributer like a P16-D??

[joetrujillo]

Hello, can I connect the Behringer p16D and the p16M to a Yamaha TF3 digital mixer with a DANTE card in the back and a Yamaha Tio1608D stage box, can I do this in the following order: Yamaha TF3, Dante Card, Cat5e, Yamaha Tio1608D stage box, BEHRINGER P16D and P16M. Can I do this?. Thanks

[Thealeph-tavproject]

Hi there, I'm a lil confused, so please help me. I'm planning on buying an X32, p16M for 10 or more musicians on stage. What else do I need to make it happen and how do I route it?

[patrickm.]

I this only useable with the P16 monitoring System?
I am searching for an audio network interface that i can connect to DAWs, to do Multitrack recording.

[leoslash]

hello, i don't have direct outs in my console, how can wire the hub to the console?

[blackwraith]

Hi there!

Could you please help me..
I'm using personal monitor Behringer P16M. My question is, how to get a stereo piano sound on my keyboard to my P16M?

My keyboard is using 2 ouputs L-R directly to FOH desk . Then I use 2 aux L-R keyboard from FOH desk connect to Behringer P16i on channel 5 and 6. That means i already make stereo connection after i press LINK button for channel 5 and 6 on P16M.

But the problem is, my keyboard piano sound still remains in mono image even after i link channel 5 and 6 on my P16M to get stereo sound. So there is no different between using 1 channel or 2 channel link together on channel 5 & 6 if the sound still remains in mono, cannot spread to get stereo image.

Could you please give a solution?

By the way i'm using IEM Shure SE 215 with stereo jack adaptor.

Thanks!

[eliszamno]

can you teach me how to hook up studio live and p16l?