Voltage and clipping

preview_player
Показать описание
Voltage and clipping explained #down4sound #ds18 #teamhertzdonut #amplifier
Рекомендации по теме
Комментарии
Автор

foudn you from tiktok in 2024, takes time brother. <3 you've cleared lots of things up for me since i started my quest

dereckp
Автор

I have a 400 amp alternator 3 batteries i was wondering how to do cmax caps I'm kinda new with the new tech just wanted to understand cmax thanks

waltlivernois
Автор

Will you be at muscle shoals this weekend

joeylee
Автор

Hi, I had a question for you dude I have a single bank of LTO 45ah a magnus vs3500 running 0.5 7:28 ohm which is powering a 12" vibe HEX 5000Rms tuned to 29hz. My voltage floats at 14-14.5 stock alt when hitting low bass my voltage goes to 13.7 and amp starts clipping I got told by a friend if voltage is not in 12s electrical systym is good even in 13s and got told my amp is bad and to replace with another what do you think?

habibrehman
Автор

I dont have a variable voltage thing so i gusss id have to take off a diode to set my gains at lower voltage. This is absolutely my problem rn, i set my gains at 15.8 but it drops hella hard like down to 14s, only using a 35ah lto bank on 7k, thinking if i make it a 70 ah bank it will fix the drop? Im already on a 320amp alt which is the biggest i can get

pawkisser
Автор

A slight clip in a song is okey or not love the video ❤

kayone
Автор

Man will get the sponsor its coming maybe 5yrs maybe 5 days lmao it's gonna happen btw love the channel 😂

marthewroberts
Автор

When I start my car it reads 14.9. Gets below 12 when going full tilt and amp clip light will start flashing. I am no professional dont clown me, is my amp just tuned bad ? Or is it that I do not have enough power pushing to my amp? I have a salt 2k and a 15” on a stock battery and alternator… I’m wondering if that’s the problem

xxceilingfanxx
Автор

What about on stock electrical 14 to 12.5

matthew-ziyy
Автор

Jerry please excuse me for being dumb I've been inside for over 10 years and got out last year and everything in car audio has changed EVERYTHING and I'm slowly learning everything and upgrading anyways I just ordered my first EVER High output alternator and VCM 6003 from Autotech for my 19 Camry and I ordered a 30AH bank of the 75c SCIB 10AH LTO cells for a good power delivery to my equipment and I am in the process of installing all that stuff but trying to learn how everything works with the HO alternator and voltage etc so if I understand you correctly you are saying even if I'm going to charge around 16 I need to set my amp with my voltage turned down so that when the voltage does drop from the Bass it doesn't throw a clip light on the amp is that correct and if so what voltage would you recommend tuning my amps at if I'm charging around 15.8

SlamryCamry
Автор

Hi can u answe this for me my clip light stayin on y never seen tht bfr

richeyexclusivebullies
Автор

I just discovered this channel today and installed my 1st amp/sub a couple days ago This may be a rabbit hole I didnt plan on. Cerwin Vega s91000.1d 500 watt 10 inch memphis I cant get this thing sounding good to save my ass. im getting 14.9v not running the sub Ill hook up my scan tool and check it when im pulling load on the system. I ran 4 awg OFC for power/ground to amp and added 4 awg ofc from 110v alternator to battery and battery to chassis. Im new to Columbia SC and dont know whos reputable out here to help me on this wild pursuit of premium car audio.

theverizondroid
Автор

I’ve noticed exactly what u were sayin here. When my vehicle first starts up and my alt is in full charge to get the voltage up to 14.4 I can play full tilt and no clip indicator light but once I my battery charges up and the alt starts to rest some and the a long bass note hits and drags the voltage down the yellow light starts blinking. Makes a lot since thanks man. I need a stronger alt and cap bank to keep my voltage up and yellow light off. This was my reasoning for purchasing a single 15 with 4dvc so I can run my smart 3 at 2ohms until I can upgrade my electric then purchase another 4ohmdvc so I can go to 1 ohm load with double the surface area. Should be a hella big difference

wetdookie
Автор

I know this video is old but I can tell you from my experience my voltage drops at a certain volume?my head unit goes up to 45 but its factory i notice right before i installed my amplifiers nothing changed over 35 so that tells me I shouldn't go beyond 35 if I don't want my voltage to drop so rule of thumb 75 percent of maximum volume which would be 33.75?35

ceciljones
Автор

How terrible is 12.4 Volts full tilt?

12.4 and above ok?

FinsleysCustomCarAudio
Автор

I need some help. I have the sfb1000 amp running a SA classic on 1 ohm.
the amp keeps clipping. I sent it to sundown for testing. they said amp is good and issue is cause by bad rca signal from the radio and music source bluetooth. They said it was premature clipping.

Is there such thing?
How do I fix this?

ssc
Автор

hey bro, do you have any playlists of songs with decent bass I could have a look through?

anybudz
Автор

I know it's old I just got 2 skar 18s evl . On a on a big boss 3k . Pretty much when I get in to bass yes my lights go dim so yea vot problem I just can't seem to get out of clipping and don't really want to spend money where money is not needed if that makes sense my gan is like a quarter of the way up if that and I start clipping should I just throw a bigger ault on or try a 2ed battery I am doing the big 3 at some point I know that will help some just want someones opinion that knows what there talking about

Treighjustice
Автор

I'm having a issue with my voltage drop. When I start car up voltage meter 15 volts to 14.8 when deep bass or some lows hit. It drops down to 12.8 with a xs power d3400 in the back. 145 amp alternator

scottgoveiareptiles
Автор

Hey jeryy i have a sundown sa 15 and its on a 2500watt amp and my lights are dimming should i get a bigger alternator or should i get another battery

gabriellopez
welcome to shbcf.ru