HOW TO...Install lifeproof vinyl flooring.

How to install lifeproof flooring in a matter of hours.
Installing Lifeproof flooring is a snap, no pun intended!!! this flooring is so easy to install that anyone can do it with a few simple tips and tricks.
I had never installed this product before but I have installed a number of other flooring products. As soon as I put the first few boards down I knew right away that this product would go down fast and look amazing when completed.

CLICK the Subscribe button on my main page:

Lifeproof flooring:

Link to the HAMMER:

[qq]

if you are a DIY person, remember to leave a 1/4" gap to the walls and stuff like he was trimming at the end around the door because it needs room to expand on all sides

[Extragoldberg]

Thank you for the video. Final floor looks nice. Whether your randomly stagger, or alternate is personal preference... One technical point for viewers - you should first tap the length wise edge tight first and then the end joint. This will avoid the gaps that you showed in the earlier part of the video (and avoid those joints separating with time).

[kangee]

Great video. My daughter just bought exact flooring and this will really help us

[chizuck]

Is there a piece for the transition from one room to another or a hallway?

[mountaingrownnomad]

Joints should be staggered same as when doing roofing. I don't mean to be critical but hopefully to prevent other DIYers from making that mistake. Also, open multiple boxes and pull planks randomly to get a variable pattern and color mix. It'll look much better. And finally, connect long side clip first and end caps last.

[yvoncarriere]

Your joints should be staggered avoid patterns should look natural

[jolyoncollier]

Hi guys,
There are a lot of fake accounts that like to bash people on YouTube due to the fact that they may have their own install videos that they're trying to get money from. I don't subscribe to YouTube for money so when you go through the comment you can click on the fake accounts and see that they are just profiles that they use to hate on people to try and discredit your work.
Shame on these low life people.

[rdGenFireChicken]

He is doing what we call seam over seam and that looks like shit. He also needed to undercut the door jambs so the floor slides under them and you get a clean look. Wow with the tape are you serious pal

[rdGenFireChicken]

This guy has no clue at all. Please people do not listen to him on how to install this flooring.

[rdGenFireChicken]

You have to purchase what they call a tapping block to close that gap not how he is doing it. Also purchase a pull bar for your last row of installation. And the floor does not tighten itself down as you get past the 2nd row. This guy has little to no knowledge of installing this floor

[rdGenFireChicken]

You’re suppose to have random stagger to make the floor look like real wood. Also no red lines to joints this guy knows nothing.

[rdGenFireChicken]

You need to stop making this video on how to pal

[rdGenFireChicken]

This guy has no clue and has no business making a how to video on laying vinyl planks