Easy DIY Project - Interior Sliding Door Kit Installation | National Hardware

Hanging a decorative interior sliding door is easy with National Hardware sliding door kits. Follow along as we show you how to DIY a sliding door in your home. Interior sliding doors are great for saving space and creating a custom look in almost any home.

[lynngolding]

How do you close the door from inside the room. I assume you have to slide it across whilst going in and then use a flush handle on the other side to close when inside ?

[Takmelius]

What they don't mention is that in this video they used a new door, not the old door, which is what you will need to do. Either that or you will need to increase the width of the old door to cover the gaps on both sides created by the gap between the door and the frame.

[pexzk]

You guys forgot to mention find the studs when you screw the board to the wall

[brianjames]

You fail to mention how high up the slide rail has to be from the floor.

[themechanicaldude]

what about the gap in btw door frame and door after closing it? how do you solve that?

[z_polarcat]

How come the door doesn't swing back and forth at the bottom since there isn't a track down there?

[Jacob-jods]

Do I need to use a router to cut my door underneath? And how do I put the floor guide on?

[ralphjosephpugh]

Doesn’t the 1x6 need to be screwed into the studs behind the drywall?

[bmcgar]

I had to look for this video because the instructions on the box were so unclear.

[lugitobejo]

Ngomonge anti pacaran tapi gelem di sentuh-sentuh, yang bukan dari darah dagingnya...!!!! Apa-apaan.