How to Replace Ignition Switch 2007-14 Chevy Silverado

Buy Now!

If the ignition switch in your vehicle is not working properly, you will have trouble starting the engine! This video shows you how to install a new ignition switch on your 2007-14 Chevy Silverado.

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[Justis]

Subscribed great video no wasting time straight to the point thank you!

[reinaldodejesus]

I had the tumblers replaced and put the same numbered tumblers back In and didn't have to make a new key thank goodness 😊

[Zsiefring]

What do you do if the key/cylinder wont lock back into the hole?

[zxDILLIGAFxz]

Could you do a video on swapping out the key ignition for a push button for the same vehicle???

[punishr]

Hi I have a 2007 sierra sle 1500 and they key is worn out and wont turn. I called a local parts supplier and they said that you need to do the reprogramming etc, why can't I just replace the cylinder with a new key? Great video and thanks.

[shoein]

What is the little white push button plug for on the top?

[shaquillewilliams]

I did all that dash lights come on but won’t start

[johnlong]

Where he talks about matching up the gear will not work. 2:15 It sounds right but DO NOT DO THIS. Befor removing the ignition switch, reinstall the lock cylinder The gear is spring loaded and it must be all the way over which you can not do once you remove the switch.. Another video I have seen says to put the lock back in and move it before removing the switch.. I did it his way and now it will not start. The key will not rotate enough to send power to start the engine. If anyone knows how to make it work his way. PLEASE LET ME KNOW.

[shawng]

If I take the old transponder ring down and put it all back together. It should still recognize my old key correct? Im afraid to take it off and wipe out the program

[loriwolske]

What do you do if the key will not turn to start with

[ronrios]

Did you have to reprogram the switch or anything like this. My truck has same problem won’t turn it’s stuck

[qrs]

what is te purpose of this switch and how do i know if this switch is not working?

[philrutulante]

I had to remve everything In this video to replace the shift controller. If the truck does not start after you are done but the lights all power on you have the gears and inner ignition not lined up. Make sure it all goes back together.

[rodneytilley]

How to change the key cylinder for a 2007 GMC half ton pick up

[jacobhaugk]

Could do everything accept the pick to get the actual key ignition out wouldn't work

[rodneytilley]

How to fix 2007 GMC pick up truck key won’t turn

[hawknottopgun]

Now the codes are gone but it still won’t start 😂

[NutssMungo]

This video needs to be deleted you have 80% of these viewers doing it all wrong