filmov
tv
Identify Hot Wire And Neutral Wire In A Light Switch That Is Not Colored Labeled
Показать описание
Be safe and responsible if you do not know what you are doing consult an electrician! I show steps on how I identified a hot/black wire and a neutral/white wire in a old light switch.
Step 1: Turn the power off to the area that you are working on.
Step 2: Test to make sure the power is off with a tester and separate the wires.
Step 3: Plug in a grounded extension cord into a known grounded outlet (which has the face look).
Step 4: Turn the Power back on.
Step 5: Set your Multi-meter to AC Volts.
Step 6: Plug in the black lead from the Multi-meter into the grounded extension hole.
Step 7: Place the Red Lead on each wire (one at a time-making sure the wires do NOT touch each other) while looking at the Multi-meter to determine which one is getting more current. Usually the one with more current/volts is the Hot Wire.
Step 8: Turn the power back off.
Step 9: Mark the wires with colored electrical tape such as black and white electrical tape etc.
Step 10: Replace outlet with compliant hardware like a light switch or standard outlet.
Step 11: Turn the power back on.
Step 12: Test and then ENJOY your new outlet.
Step 1: Turn the power off to the area that you are working on.
Step 2: Test to make sure the power is off with a tester and separate the wires.
Step 3: Plug in a grounded extension cord into a known grounded outlet (which has the face look).
Step 4: Turn the Power back on.
Step 5: Set your Multi-meter to AC Volts.
Step 6: Plug in the black lead from the Multi-meter into the grounded extension hole.
Step 7: Place the Red Lead on each wire (one at a time-making sure the wires do NOT touch each other) while looking at the Multi-meter to determine which one is getting more current. Usually the one with more current/volts is the Hot Wire.
Step 8: Turn the power back off.
Step 9: Mark the wires with colored electrical tape such as black and white electrical tape etc.
Step 10: Replace outlet with compliant hardware like a light switch or standard outlet.
Step 11: Turn the power back on.
Step 12: Test and then ENJOY your new outlet.
0:01:15
How to Identify Hot, Neutral and Ground Wires using Digital Multimeter and Probe
0:00:36
How To Tell A Hot Wire From Neutral When Both Are The Same Color
0:01:38
Ways to identify the hot and neutral on same color electrical wire #electrical
0:00:55
Which is the “hot” wire, which is the “neutral”?
0:04:04
How to Identify Hot, Neutral and Ground Wires Using Digital Multimeter
0:02:35
How To Identify Hot and Neutral Wire On Lamp Cord
0:05:52
How To Identify Neutral Wire
0:02:03
How To Find Find Hot Wire Without Color Clue
0:01:31
Identify Hot Wire And Neutral Wire In A Light Switch That Is Not Colored Labeled
0:00:15
HOW TO IDENTIFY NEUTRAL WIRE.#Shorts
0:00:33
CRAZY, READING A HOT NEUTRAL AND THEN ITS NOT. Why?
0:00:55
how to identify hot , neutral and Ground wires using digtal multimeter and probe
0:03:42
Identify The Hot Wire (Knob And Tube)
0:04:14
How to Identify Neutral Wire with Multimeter
0:11:13
Ground Neutral and Hot wires explained - electrical engineering grounding ground fault
0:00:08
What happens when the live wire and the neutral wire are reversed?
0:00:45
open neutral is what tester says. 90 volts or so . voltage on neutral over 20.
0:02:07
Find the correct wiring for a 3-way switch in 2-minutes!
0:00:10
How to distinguish between neutral wire, live wire and ground wire
0:00:16
How to check a wire for power
0:08:03
How To Find A Hot Wire | Identify the Hot or Line Wire Using a Couple Cool Tools
0:01:29
The Simple Way To Identify The Same Color Hot Wire And Neutral Wire
0:00:27
European Electric Cable: Blue Wire, Brown Wire & Green-Yellow Stripe (Live, Neutral, Ground)
0:00:15
How To Find phase🔴 Neutral ⚫ Earth🔵 in same colour wire #short #youtubeshorts #trend #viral
Комментарии