Setting up AS3X and SAFE with Forward Programing-AR631-AR630 by FGFRC

Well you installed a new AR630 or a AR631 but how do you set up SAFE and AS3X? How does Forward Programing work? In this video I explain in simple terms how to set up SAFE and AS3X using Forward Programing with my Spektrum NX10.
00:00 intro and scenario
02:23 flight mode
06:04 start forward programing
08:29 set orientation
10:58 flight mode activated
11:48 SAFE is working!
12:04 Just AS3X!
12:34 How to fix the AS3X
16:30 Verify it all!
17:01 Summery
19:27 Factory Reset?
21:10 conclusion!
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!

[FatGuyFliesRC]

I delayed putting this out until I was confident in my procedure of doing it first.

[markjannakos]

I know this is a year old video, but I have use this at least six or seven times to help me setup my systems, thank you so much for making this, it has help me big time!!

[cyclerider]

I could never get AS3X set up properly for almost a year. Now I know how. You have the only YT video I have seen that mentions fixed/adjustable gains. Thanks so much. Keep up the good work.

[jamesiv]

I have watched several videos on setting up 631 and 637T before I did them. Now I know why they were not correctly setup. Thank you for the great video.

[cooperbrown]

After watching this video I FINALLY successfully programmed AS3X and Safe for my first time! Let's go!! Thank you for your help!!

[donaldJohnson-cd]

Great video. I was about to take ar631 & DX8 back to HobbyTown and pay them to set it up. I was sooo frustrated and mad at Spektrum for not saying a thing about this anywhere. Your video was long enough to cover the subject, not the least boring. Again, Thank You!😊

[eduardoserrano]

I find myself coming back to this video every time I need to program a receiver. I just programmed an AR631 receiver. I love this video.

[Rccrasher]

This is the best RC instructional video I've seen on YouTube. I would of never figured this out on my own. Thank you!

[rayhicks]

Great video, I’ve been doing this procedure but had a brain fog lol. Rewatched this video and all went great!! Thanks for the great instructional videos!

[jonathanrebecca]

OMG. I love your videos. You are one of the most under rated person in the YouTube RC plane world. Keep on doing your great job. Thank you again for giving us such comprehensible video.

[bobmabel]

Just bought an A630 Rx. As always you are the first stop on YouTube for me. Thanks from the UK for your skill, enthusiasm and just your general way of being - much appreciated!

[barryhansell]

All my other planes a BNF . just bought the FMS Cessna with a AR631 receiver and was absolutely lost. A great slow methodical explanation. Great video thank you so much

[peteroliver]

Brilliant - frustration was getting the better of me till I watched this video. All up and running now ready to go !!!

[gooddaytofly]

Wow. Well explained. I cant believe Spektrum makes things so complicated. Thanks for the video.

[lawrencewilliams]

AIN'T EASY STARTING OUT THESE VIDEOS ARE THE BEST THING SINCE SLICED BREAD 😊 MUCH APPRECIATED

[Flyeasy]

Thank you for showing the NX10 up close which is what I have as well. I appreciate you helping us out with the set up procedures.

[MartinDuLude-joez]

I always refer to this video regarding AS3X and SAFE flight modes set up etc. Very helpful and much appreciated sir! Thank you.

[petezeekster]

THANK YOU! THANK YOU! THANK YOU! First off, God Bless You Sir! After watching Skektrum and other videos and attempting many times over to get the AS3X working I came across your video. NOT ONE OTHER PERSON MENTIONED THE THROTTLE HAD TO BE PUT OVER 25% FOR THE AS3X TO WORK! I've been flying for many years and I'm a Spektrum guy but fairly new to AS3X receivers. I was seriously starting to think something was wrong with my DX9. Your video was incredibly helpful all the way through!
Something to note for more experienced/3D flyers is that if you choose to assign the gain to a rotary knob/slider, you need to make sure you switch the settings from fixed to adjustable in order for the in-flight gain adjustment to work.
Thanks again bud!
Pete

[Bellairvideo]

Once again Greg, I use your FWD Pro. guide to check all my settings each time. I just yesterday received the new XFLY TWINLINER. I think I am one of the first to get this great model & have posted an unbox/Assembled video. I just installed the AR630 into it & again following your guide. Looking fwd to flying it as soon as the wind dies down here in our Aussie Autumn. Thank you again Greg.

[roddraym]

Hugely helpful! Thanks for sharing this insightful video. "Faith, Family and Friends", Agreed!