AMAZING! ELECTRICIAN TOOL YOU MUST HAVE! #electricalhacks

Показать описание

Tool used on steel boxes to make wire pulling easier

Starving Electrician

Рекомендации по теме

Комментарии

As one who works alone most of the time, these things are great. I created a bracket and mount one on my spool holder to keep wires together. Very useful when working in tight or congested spaces - old homes, occupied spaces, etc.

stringlarson

I like the ones with rollers better. Fight less friction with those.

electricdl

Should be made to also handle 4 11/16" boxes. At the large hospital that I retired from we had to push around a $14, 000 cart with sides that extended to fit under a 2 by 4' drop ceiling titles. Had a 120 volt HEPA filter. When pulling wires you had to have two carts. We had the carpenter shop cut us a 1/4" piece of corian and installed 4 " round hole with a few pieces of rubber mating with slits to keep dust from falling out. With that set up only needed one cart.

garbo

Who pulls wire like this? You should be set up at the panel and pull to your boxes so you don't have to keep moving your wire spools after every pull

jimbush

Good idea, except for the bottom slot.
Wires can slide under and jam between the box and the device.
I understand the reason, but should be able to close this part whille pulling.
And also, this is only for 4x4..
Should be compatible with all of most common box types.

martf

I do commercial and industrial, and there's always something to hang an empty spoil on and use that to pull and not have your wire scrape. I've had to work alone a lot lol.

xZohan

Ohh, I love a good electrician’s tool ❤

mauriceshumock

Should be a bush on the end of the conduit.

dogwalker

He has rigid conduit in a 1900 box in a wood wall. And the box is mounted wrong (screwed directly to the stud.)

nooneyouknowhere

if it doesn't work better than the one with the rollers, I call it a not gonna bother.

kenbrown

Shouldn't have mounted the 4sq through the side holes. Should be on a bar bracket or have a bracket to mount with

eriknelson

Smart ✅️ imma 3d print something similar

Handlealreadytaken.Trythisone.

You mean there is a tool I can buy for pulling my wire? What will they think of next?

DieselDog

Holes are slotted the wrong direction. For over 90% of my pulls pull wire up to ceiling or down from ceiling so if screws come loose they way its made would fall off.

garbo