2022 + WRX FA24 Air/Oil Separator (AOS) Install Instructions | IAG Performance

IAG step-by-step installation of the V3 Air/Oil Separator (AOS)

[doubleflo]

This install looks tough! Might have to use some PTO lol

[shiloh]

Excellent follow along video, almost as good as written directions...but nobody believes in hard copy no moe!!

[RustedCrown]

got it installed, love it a lot, need to do some searching to find a strut bar to work with it

[kye]

The last step “ Bleed the coolant” the coolant is not bleeding what’s the sign?😢

[SRGIBOSSTYCOON]

Looking at how this is set up looks like ima have to not use my Perrin strut tower bar??

[mustangred]

Great install video even though it’s a pain to do

[ramvaldez]

got mine green and i love it thank you so much ill be doing a facebook and ig live review when install

[wanglee]

This looks identical the the Legacy/Outback XT. Does the custom bracket for the canister line up on the L/OB XT suspension mounts also? Also I heard these are bad for any climates where winters reach freezing temperatures.

[richardwilson]

Will this system work on my N/A 2.5 ice engine, without blowing the seals out?

[geraldboylan]

Question, my car is almost at the expiration of factory warranty… I want to add the AOS .. does it matter if your running synthetic oil install AOS then go to a 5w30 oil ?

[roberthoffman]

How dose it hold up in the far north climate, worried about condensation freezing in the cup or possibly hoses and splitting them ?

[tear]

Wheres is the fa24 longblock coming out?

[squirrelzar]

Is there a list of tools needed anywhere handy? Saw one person mention they got halfway through before realizing they had no 27mm socket

[richardwilson]

does it make any sense to direct the acidic micro carbons vapors from the crankcase and reintroduce these contaminates into the unfilter air flow and fly back into the combustion's chamber to mix with the combustion cocktail and then on toward the oxygen sensors and out into the converter to build up and cause the ECM to pump out more fuel into the fuel injection process? BTW I do not want to create lots of back pressure to blow out the cheap seals and gaskets that mfgs enbrace!

[okay]

Do you have any a/o separators for the type r?

[cayzerjin]

What’s the torque spec for the pcv fitting?