Must Have Mods for Vulcan 650 S Best Mods for Kawasaki Vulcan 650 S Motovlog

#Vulcan650s #Kawasaki #Motovlog #Mods #DIY #Vulcan650 #Motorcycles

👇 SUBSCRIBE NOW 👇
🎁SCROLL DOWN FOR LINKS TO BUY THE MODS AND MORE VIDEOS 🎁

In this video I cover all 14 modifications on my 2017 Kawasaki Vulcan 650 S. All the install videos and links to buy the mods are below.

I swapped out all the lighting including adding SKTYANTS LED headlight, Bikemaster Tanto LED turn signals, and Chrome Glow fender delete LED tail light. Changed the foot pegs to Kuryakyn mini floor boards. Swapped the stock chrome brake and clutch levers to black shorty levers for quicker control and reduced hand fatigue. Added a Quadlock phone mount with vibration dampener. Added the Airhawk seat cushion. Added the Vulcan S radiator grill cover for added protection from rocks and road debris. Swapped the stock mirrors for Fenrir Bar End mirrors.

Bike came with the 12V DC Power Outlet and two 2.4A fast charge USB charging ports (also have the relay kit which is required for the power outlet to work), CS Racing exhaust (5% discount below!), booster plug, deer whistle on the front fender, and 10mm swingarm spools for easy lifting with swing arm lifts.

🎁BUY THE MODS!!!!🎁
👇Buy CS Racing Exhaust with 5% DISCOUNT👇
👇10% Discount on Quadlock👇
👇Buy Kuryakyn Floorboards👇
👇Buy Adapters for Floorboards👇
👇Buy Bar End Mirrors👇
👇Buy Clutch and Brake Levers👇
👇Buy Radiator Grill Cover👇
👇Buy Chrome Glow Fender Delete Taillight👇
👇Buy LED Headlight👇
👇Buy LED Flasher Relay to fix hyperflash👇
👇Buy Quad Lock Phone Mount PRO👇
👇Buy Quad Lock Phone Mount👇
👇Buy Quad Lock Vibration Dampener👇
👇Buy Atlas Cruise Control👇
👇Buy Seat Cushion👇

Thank you for supporting the channel! As an Amazon Associate I earn from qualifying purchases.

MORE Vulcan 650 VIDEOS!
👇LED Front Turn Signal Install👇
👇LED Headlight Turn Signal Integration👇
👇LED Headlight Install Video👇
👇Fender Delete Taillight Install Video👇
👇Quadlock Install and Review👇
👇Bar End Mirrors and Levers Review👇
👇Bar End Mirror Install Video👇
👇Brake and Clutch Lever Install Video👇
👇Vulcan 650 Riding and Meeting Motovlog👇
👇Atlas Throttle Lock Cruise Control Review Video👇
👇CS Racing Aftermarket Exhaust Sound👇
👇Vulcan 650 S Riding Motovlog👇
👇Radiator Grill Cover Install Video👇
👇Kuryakyn Floor Board Install Video👇

Thanks for watching!
Follow me on Instagram @kamdorian
Hit the LIKE button and SUBSCRIBE!!

[mogthemoogle_]

If you haven't already found a solution for your hyper flash problem, all you need is an LED conversion resistor. You can buy them at any parts store dirt cheap. You just wire the resistor in parallel (bridge the +/- wires going to your turn signals with the wires on the resistor) with your signal wiring. You'll need one for each turn signal.

[e.cabrera]

I actually just did the mirrors last night, the hardest part was removing that bolt with loctite. Your vid made it super quick and easy!

[TheDennyBros]

This video it beautiful and thank you. i finally found some foot boards. couldnt find any prior.

I will mention about the seats, the Extended for anyone wondering if you are 6ft+ it is worth getting and EXTREMELY more comfortable than both the standard and mid reach seat. longer rides are more gentle on the tushie.

[ghazalnukisrabahri]

Really love your mod bro, you keep it simple but still look freaking awesome

[ME-hjnz]

if it wasn't already mentioned, the turn signals: when you had the stock ones on, they use a filament bulb, which adds resistance and is how the bike knows the signal is working. Changing over to all LED, doesn't have the resistance and the bike thinks the bulb is burned out, that's why it wont blink. There's a resister you buy or make, to put in the wiring, that fixes this. search turn signal resistor.

[markyan]

I changed my mirrors with exactly the same you have. Earlier, in the video you explain how to do it, I read that this cause some vibrations. In my case, I had some vibrations before change the mirrors, and after I did it, I do not have absolutely any. I didn't add back the wights too.
Whatever :) I like how your Vulcan looks like, and I'm going to almost copy it :) Great job! And thank you for the videos, and additional information!

[fresnohighlander]

Nice 650, and video! I wish you started it though. I have those rear spools, I'm leaving them green, green is good luck for Kawasaki's

[betternamechosen]

Saw a video of one of these on the dyno. With the booster plug the bike was getting less HP and burning through a LOT more fuel. When they tuned the bike they reduced the fuel by 15% compared to the booster plug.

[brittychiky]

I am about to spend so much money on mods thanks to you!! I cannot wait!!!

[dcsy]

Great video and mods btw. Can the USB adaptor be left plugged in to the 12v DC power outlet without draining the battery as long as nothing is attached?

[CODstreamz]

Idk what it is about the Vulcan s, I've had bigger bikes before, and I find this one to be more fun. I was hesitant at first about the smaller size. But I love it

[DavidDiaz-lhvt]

Just got a 2015 Vulcan. Thanks for the video

[CornishMotorcycleDiaries]

Excellent summary of your mods and I shall be implementing some of them. Thanks.

[peterandrew]

Awsome! Thanks these mods and the show tour! Nice tipp that muffler solution at 11:01 I wouldn't have thought so on it. My options was may a change a cushions to airfoam's type, and put a secondary WiDE seat on the back, and those rest pedals, and something analog guages instead of digital blindness meters. Fabolous the rear led method too. I don't know what I would do without them. Maybe a one metallic blue motorcycle? - Hilarious. - I think so the vinyl body sticker will solves that too.

[cardbordlord]

I have a 2022 Vulcan S 650.I purchased the same mini boards.I cannot find the correct adapter to fit.The one I have is to small.Lot of play between adapter and mount. Do you have a part number for the adapters? Your videos have been very helpful. THANKS!

[capricik]

You know you can apparently get your ecu flashed to remove the jerky motor issue (instead of using the booster plug).

Other than that, with these modifications you made, it's my dream bike!

[Valkross]

You must freak out a lot of dogs with that deer whistle.

[izzojoseph]

Your bike looks so clean!
Love what you’ve done with it.
Been watching since you out on the rear tail light!
Never knew about the deer whistle.
I’ve hit 9 deer in 9 years with my car.
Great idea

[jdsmetalfan]

Good looking VS. The blinkers are awesome! Did It come with 4 or just the two?

[evannc]

Really clean bike, love from France bro 🤙