CFD analysis of a water steam cyclone separator with OpenFOAM

preview_player
Показать описание
This CFD analysis shows the fluid dynamics of a water steam cyclone separation unit. Volumetric flow is ~230 m3/hr, inlet velocity 3 m/s. Steam with 10% water content enters the separation device and gets split into dry steam and water by centrifugal forces. The bottom outlet would lead into a steam trap. The top outlet contains dry steam only.

This video is only for educational uses.
  1. Clemens Lischka
  2. CFD
  3. OpenFOAM
  4. cyclone separator
  5. water steam separation
  6. multiphase
Рекомендации по теме
Water Filling in 0:00:21

Water Filling in a Tank - Ansys CFD Fluent

CFD analysis of 0:00:34

CFD analysis of a water steam cyclone separator with OpenFOAM

Water Wave Generator 0:00:17

Water Wave Generator - Ansys CFD Fluent

CFD multi-phases analysis 0:12:20

CFD multi-phases analysis over water and air behavior in tank

CFD analysis of 0:00:46

CFD analysis of a waste water treatment device with OpenFoam

Differences between VOF 0:00:34

Differences between VOF and Euler/Euler approach in multiphase CFD simulation with OpenFOAM

OpenFOAM - CFD 0:00:21

OpenFOAM - CFD - Oil Water Separator - Multiphase Simulation

CFD Pool Boiling 0:00:36

CFD Pool Boiling -Simultaneous Heat and Mass Transfer Model-

Oil Separator CFD 0:00:31

Oil Separator CFD Simulation | Eulerian Multiphase | OpenFOAM | CFD for Oil & Water

Water turbine analysis, 0:00:14

Water turbine analysis, thorugh CFD simulation.

CFD Analysis Tutorial 0:10:57

CFD Analysis Tutorial | Simulation of water entering a container.

CFD in the 0:01:05

CFD in the Water Industry: Automatic Optimization of pipe system

CFD Air Bubbles 0:00:36

CFD Air Bubbles in Water

Flood over Bridge 0:00:16

Flood over Bridge CFD simulation | ANSYS Fluent Tutorial

CFD in water 0:00:41

CFD in water & wastewater treatment: Mixing tanks, tracer dispersion

CFD in the 0:00:58

CFD in the Water & Process Industry: Particle dispersion in a stirred-tank reactor

CFD analysis of 0:00:48

CFD analysis of a water steam separation drum vessel with OpenFOAM

Pelton turbine CFD 0:00:29

Pelton turbine CFD simulation - with FLOW-3D

CFD in Water 0:01:27

CFD in Water Treatment: distribution chamber

Fluid Flow Simulation 0:12:08

Fluid Flow Simulation In 3D Circular Pipe | CFD Analysis of Pipe | Simulation

CFD analysis in 0:00:23

CFD analysis in Centrifugal Pump Impeller-1

✅💯✅ Ansys Fluent 0:16:39

✅💯✅ Ansys Fluent Project # 26 : CFD Analysis of a Water Jet Propulsion | Steady State

ANSYS FLUENT - 0:23:28

ANSYS FLUENT - Air-Water Multiphase Flow Analysis Tutorial || Ansys Fluent CFD Analysis Tutorial

Comparison of Water 0:00:34

Comparison of Water and Castor Oil Bottle Emptying | Transient Multiphase CFD Simulation | VOF-Ansys

Комментарии
Автор

Hello, does this method allow us to see the droplet size distribution at the outlet? Some applications are highly sensitive to free water hence would be great to get an idea of what's the liquid carryover and the size of the droplets being carried over downstream. Thanks for the video btw!

gordonfreeman
Автор

hello, where can I find a tutorial for this simulation?

jjjyrtrrr
Автор

sir, how did you put steam in there, did you use coolProp ?

woeuhfk
Автор

What openFoam solver did you use? twoPhaseEulerFoam?

alexmachado