How to use a thread tap! #shorts

Threading holes using a tap can be intimidating at first. But it doesn't have to be! In this YouTube #shorts, J Robert Clark demonstrates the easy way to learn - starting with aluminum and using a quarter-twenty sized tap. In this short one-minute how-to, learn all you need to know to get started with threading!

#shorts

[zenmallu]

Upload more pls 😇..it’s really helpful

[beck]

Instead of manually eyeballing the tap straight, a lot of taps have a hole at the top, you can put a pin in the chuck of your drill press and center up on the tap for a guaranteed straight hole

[tommym]

Hi sir I’m having a bit of a problem I have a 420 cc motor for go kart
On side was wires for low oil pressure
I removed the whole seems to be 716
So I get a tap of 7/16 -20 and start to tap hole seems to work a lil but over all not working out rite ? What am i doing wrong

[scottym]

Luckily it's just Alum and not much surface to tap. Anything else and I would always use a tapping block.

[Sethhaun]

Yes bought a kit ..for tree spikes therecsteel

[Jonnymule]

Speed it up, put the tap in a cordless drill. In and out in 2 seconds.