Hayward XE Series Pool Pumps - Schedule Programming

[mambamentality]

Buttons !!Always!! get stuck or need to get replaced. Also ridiculous you have to set the daily operating speed through all cycles to max to properly get enough flow for a HAYWARD heater to work lol. I'm blown away all the great minds at Hayward found that the button was the absolute go to for these pumps. Must've replaced 30 of the buttons last year and had to reprogram almost every pump that had a heater a the same company's heater. Thanks for the service call money!

[Poolwhisperer]

For pool heater to work u need 40 gallons a minute so it has to be on a decent rpm for that to happen

[howdoyoufeel]

There is a six minute delay if you put the timer box off for service or any other reason. Once you put the timer for the pump back on it takes six mins to go on if you have all the intervals set up properly

[mpnewhart]

Is there numbers for how many rpm ‘s the pump runs at for the different speeds?

[DebbieWall-voky]

I have pump to come on and off 12 hour intervals 6 am to 6 pm .Would like to know if I want heater to come on during the night how do I do that ?

[CBee-kmtz]

I have a Hayward XE and I can’t get the programming to stay reoccurring. It is saved but after it runs the first cycle it doesn’t start again instead the water pressure just gets very very low showing on the water that comes down from the spa into the pool. The filter has been checked and there are no blockages. The bubbler works on a lower speed bug still worlds What can I do to fix this issue?

[carlblankschaen]

when I finished the programming cycle (held the interval 3 button for 4 seconds) it did not revert the speed back to the faster speed I selected for interval 1. Am I missing somehting? What am I supposed to do.

[pedrorenteria]

Can all 3 intervals be at same speed…. For a water feature

[michaellin]

Just got this new pump installed, question... does the 8 min priming delay the interval 1 schedule (pushing 8 min back)?

[axelfoleyt]

How long should it run for a salt water generator to work?

[jesusalbertosantiago]

The green bottom take out of the place and now it dose working I don’t know why?

[cyclechris]

Does the xe tristar have a hua? How would you suggest it be used in a omni se salt system?

[juhyty]

But how do you determine what time the pump thinks it is? For instance…I program all three intervals but I need to coordinate pool being on with vacuum being on. Help please!

[Chrisbo]

So programming stays in memory once the pump is powered down?

[noelle]

I just had this pump installed. I’m trying to reduce my electric bill. Do the lowest setting use a lot less electricity? I’m thinking because I have a screen enclosure maybe I could get away with the lowest settings.

[bijubalakrishnan]

Can a Super Pump XE be connected to an external timer? Once the unit gets power, does it run or do you need to press a button?

[profist]

The pump is programmed but what is the procedure to start and stop the pump to backwash ?

[lionnotsheep-]

Haha. I was considering buying that pump, but I am glad I watch this video. I will never buy that pump and I hope you will never deal with that complicated programming in the field.

[brandencheney]

This pump is a joke, and it's not a funny joke

[Daksterizer]

This pump is a spinning piece of garbage