SuperPro Fulcrum Steering Knuckle INSTALL HOW-TO | D-Max BT50 MUX TYRE WEAR FIX?

⚡️Keen to support future content?⚡️
🙏Check-out channel membership, Super Chats & Super Thanks

---------------------------------
💲 Parts from Video
---------------------------------

-------------------------------
📘 Video Chapters
-------------------------------
0:00 Intro
1:02 Jack up your car
1:25 Remove your brakes
2:00 Remove little brackets & sensor
2:23 Remove sway bar link
2:43 Remove dust cap
3:15 Remove brake disc
3:30 Remove wheel speed sensor
3:49 Remove pins and castle nuts
5:41 Remove hub bolts
6:10 Seperate hub
6:37 Carefully remove seal
7:12 Reinstall into new knuckle
8:02 Reinstall wheel hub
8:17 Reinstall remaining components

------------------
📱 Socials
------------------
I▶ Instagram - videoshowmehow
I▶ Facebook - videoshowmehow
I▶ TikTok - videoshowmehow

------------------------------------------------
😀 About VideoShowMeHow
-----------------------------------------------
⏩ What's with the gloves?
Not after any YouTube fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing - easy to spot my videos! If that's not your thing and you'd prefer to watch a face, all good, I won't be offended, there's plenty of better looking ones to watch already on YouTube ;)

⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)

⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)

#videoshowmehow #DMAX #superpro

Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission (not charged to you). This is one of the ways you can support the channel :) Your support helps me bring out more content for all you guys. VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.

[VideoShowMeHow]

***NOTE: MAKE SURE SEAL GOES BACK IN THE SAME WAY ON THE NEW KNUCKLES, IN THE VIDEO I INSTALL THEM BACKWARDS 🙁***

[vkxjm]

Great video Adam. I feel Isuzu Australia need to buy in bulk from Super Pro to do all this under warranty as it is their design flaw. Lots of money to improve on something that should not have been anyone's problem in the first place. Signs of wear on my tyres at only 17500 km's with no big off road trips and no Cape York trip under my belt either. Feel like I am going to be fighting a up hill battle if I go back to Isuzu as they will blame something else beyond their control.

[johnberto]

can you help with the Munji steering rake drop bolton kit?

[mattblomberg]

Bump steer class action now underway. Register at Chamberlains Law Sydney to be involved.

[fauzanahmed]

Hey Adam, thanks for another great video. The link in the description for the torque settings, seems to only list the wheel nuts settings. Does your link contain the rest of the settings? Cheers

[Huda]

Nice, looks easy enough, what’s the spacer for the sway bar link for?

[Warnut]

Just fitted these yesterday and day before. And i tell you what, even with out an allignment atm, as im still waiting on my uca's that were supposed to be here yesterday. It drives so much better!
Also i donno why but my driver side one was a c**t it took me half a day to do it just wouldnt release the lower ball joint no matter what i did ended up using jack hammer and pry bar 😂. But its done now hopefully ucas come soon then can fit and go get an allignment.

[mattporter]

Great video. Why did you neglect to fit the factory backing plate ( disc protection) ?

[fishstixfishingadventures]

Nice video, keep it up. By the way, how’s the tub canopy going? I’m thinking of pick one up.

[Wilbargosh]

I missed the 20% off discount code! Surely Isuzu will do a recall to modify their design?

[sandycraker]

Hey Adam, great video, what is the name of that axle seal as I want to have a spare pair on hand just in case I damage the original ones?

[aalback]

Great video once again Adam...what gets my goat is the fact that this seems like it's a factory design fault and yet we're expected to pay a substantial amount to rectify Isuzu's mistake!!!! This should be a recall in my mind. Do you know if there is a class action or investigation of any sort looking into this at all? Why should we have to repair a fault that obviously is a design error? My 2023 Dmax has only done 10k and the left hand front tyre is scalloped out on the inside already. Pay 60 to 90 grand for a car that you have to redesign, through no fault of yours, a fault from the factory!!!

[nadeemmohammed]

Is there a link to this product where its sold in the United States? Wanna get it shipped to Trinidad and Tobago 🇹🇹

[TurtleWurdle]

Hey Adam, i was wondering on your opinion on whether this is worth upgrading on my dmax, despite not having any major issue, i rotate my tyres every 7, 500km so I don’t seem to notice any issue, but not sure if its a hidden issue, that I’m not going to see due to the regular rotation.

[JasonfromBiripiCountry]

I feel previous models of the dmax could do with this upgrade if it was available

[NghiNguyen-uskb]

Hey Adam what size socket will I need for the lower ball joint? gonna give it a go tomorrow

[shanezdjelarevic]

Nice video mate. How’d you go getting the bearing into the new knuckle? I found mine to be a pretty tight fit.

[richardwalsh]

Can you buy a new hub seal?
If so I would replace it.

[OnlyGoodDaysCo]

Apparently engineers have updated there wheel alignment numbers and have pretty much eliminated the issue.

[brandoncrane]

Is it just me or did that seal that can't be damaged go back in the wrong way round?