How to open any laptop battery without destroying it. Disassembly HP laptop battery pack.

How to open laptop battery without destroying it. Disassemble laptop battery HP. How to open laptop battery. How to disassemble laptop battery pack.

Affiliate links:
Amazon:
Genuine NITECORE UM2 Chargers:
USB testers:

Aliexpress:
USB testers:

Support my project:

[jasonga]

How to open a laptop battery WITHOUT stabbing yourself

[peteryeng]

Thanks for the remark that if the battery does not charge at all, the controller is gone. My battery went from pretty normal to zero charge. This tells me I shouldn't try to replace the batteries because it is the controller that is out. I appreciate that one remark that has saved me from aggravation.

[zzyazy]

No! No! No! Don't pull that box cutter toward your thumb or exposed hand! If the blade slips, you'll be sorree.

[danpast]

Good work, you didn't edit the heck out of the video and showed how tedious the process can be. Thumbs up.

[videobruceb]

If you think any decent original pack will come apart that easily, dream on!

[Idahomie]

I have been using an very fine tooth Xacto saw and going along seams. also made a knife tip for my soldering iron and go along the seams. A sharp wide, not too wide screw driver works to find the areas not glued securely

[craigbeall]

Some of them are welded along the seams so it is literally impossible to open them without cutting the plastic. Next one I open I am going to use a thin cutting blade on my dremmel grinder, replace the cells, and use epoxy to reseal the two halves again.

[irsanbauer]

Terlihat mudah utk dilakukan, berkat keahlian yg dimiliki. Coba sebelum saya membuka batteray Laptop saya, seharusnya saya melihat video ini. Semoga yg menyangkan video ini mendapat ilmu2 yg lbh banyak lagi, guna kemajuan bangsa yg sedang membangun yg banyak membutuhkan dana.

[telumatramenti]

Thank you for the video. You're awesome. It only took me about a minute to open an old dead laptop battery. I got 4 working batteries out of it (charging now) and 2 dead ones. I figure it saved me about 36 bucks. This is actually better for the environment, the laptop battery would have ended up in a landfill. Now the plastic case is recycled and there is 60% less waste in the near future. Haters are idiots, - it's next to impossible to short out a battery or cause "explosion" by doing this, the batteries are connected in series, even if you wedged screwdriver between their contacts somehow, (which is impossible because of how they are lined up) - nothing would happen. You just have to be careful and apply minimal pressure. And always wear safety goggles and electrician gloves when you do this if you want to be absolutely safe. Also - use a voltmeter and intelligent charger.

[electronicshelpcare]

This laptop battery is the best quality, I also made one power bank by using the laptop battery.

[AndreBellCopywriter]

Thanks. If second hand store ever reopens from covid-19 closure I'll snag a few of these bulk bin .50 devices for their rechargeable batteries to use in DIY portable solar charger.

[batteryfun]

Hi,

Interesting. I will take this in consideration next time I do it.
I'm harvesting 18650 cells from laptop batteries and that looks easier than my method.

Kind regards.

[eraldorh]

If you aren't trying to repair the battery and only want the cells inside its actually easier to just go outside and smash it on the floor. The casing will crack and you can easily pry what's left apart.

[kolle]

You are a lucky one. I think mine is hard glued all over. I've been trying to use a large knife but even at full strength I cant get it to open. I will probably end up cutting a large hole in it while trying to pry. I mean the battery already costs a lot. Whats the cost of putting some damn screws on this thing?

[lalsalam]

Great man!!! I m trying to do this past 1 week and no success and with blades i am very skeptic, and very nervous, one small mistake and see my fingers chopped off..

[tonypeeler]

I use a 5 in 1 tool...much simpler than fumbling around like that...and I always take a quick pic of how the cells are series together

[MauriatOttolink]

Thank-you. Excellent video except for your allowing klonky noises to compete with crucial words in your speech track.
Doing it on a piece of cardboard, carpet other soft material would have made all the difference!

[armankussainov]

Just a few steps to a trash can! The best advice ever )))

[williamgrissom]

The later HP laptop batteries, like in my HP Pavilion dv6700 are tougher. The pack looks similar on the outside, except the connector is centered. The seams are melted together, so must be cut. The six batteries inside are glued to the case. I got it open, but will look ugly when epoxied back together.

[TheStereohifi]

im happy enough to see what type of battery inside, its quite heavy compare to other battery.thank you for your video.